| Citation: |
YANG Yi, SUN Yingjie, CHANG Yajun, et al. Coal shearer positioning method based on chain-style base station coordinate fusion[J]. Journal of Mine Automation，2025，51（5）：49-56. DOI: 10.13272/j.issn.1671-251x.2024120009
|
In the narrow and elongated space of the coal mining face, Ultra-Wideband (UWB) base stations are distributed in a chain-like manner. Disturbances such as scattering, diffraction, and attenuation of communication signal transmission, along with the lack of a dynamic coordinate fusion mechanism among base stations, all reduce the positioning accuracy of the coal shearer. To improve the positioning accuracy of the coal shearer under UWB base stations on the working face, a coal shearer positioning method based on chain-style base station coordinate fusion is proposed. A coal shearer motion model adapting to the dynamic position changes of UWB base stations during the mining process was established. The Unscented Kalman Filter (UKF) was used to process the UWB measured deflection angle, and a chain-style base station coordinate fusion model based on the spatial distribution characteristics of UWB base stations was constructed to reduce the influence of time-varying disturbances. The gradient descent method was employed to iteratively optimize the position error between the coal shearer and the hydraulic support group, enhancing the coal shearer positioning accuracy in the absolute coordinate system. Furthermore, Kalman Filter (KF) was applied to filter the base station coordinate data to eliminate error accumulation caused by gradient descent, achieving high-precision positioning. Experimental results showed that within a ±40° range, the error of the UWB measured deflection angle after UKF processing was ±5°. Under conditions of antenna parallelism and non-parallelism between base stations, the Mean Squared Error (MSE) of the KF chain-style base station coordinate fusion method decreased by 91.3% and 95.8%, respectively, compared to traditional rigid coordinate fusion, and the Root Mean Squared Error (RMSE) decreased by 70.5% and 95.5%, respectively. Under conditions of no obstruction, partial obstruction, and full obstruction between base stations, the KF chain-style base station coordinate fusion method achieves higher positioning accuracy and stability for the coal shearer.
| [1] |
国家能源局. 国家能源局关于印发《煤矿智能化标准体系建设指南》的通知[EB/OL]. [2024-11-13]. https://zfxxgk.nea.gov.cn/2024-03/13/c_1310768359.htm.
National Energy Administration. Notice of the National Energy Administration on issuing the Guidelines for the Construction of the Intelligent Coal Mine Standard System[EB/OL]. [2024-03-13]. https://zfxxgk.nea.gov.cn/2024-03/13/c_1310768359.htm.
|
| [2] |
袁智,蒋庆友,庞振忠. 我国煤矿智能化综采开采技术装备应用现状与发展思考[J]. 煤炭科学技术,2024,52(9):189-198. DOI: 10.12438/cst.2024-1054
YUAN Zhi,JIANG Qingyou,PANG Zhenzhong. Application status and development thinking of intelligent mining technology and equipment in coal mines in China[J]. Coal Science and Technology,2024,52(9):189-198. DOI: 10.12438/cst.2024-1054
|
| [3] |
谢巧军,蒙昱璋. 基于UWB技术的采煤机定位系统[J]. 智能矿山,2023,4(11):72-77.
XIE Qiaojun,MENG Yuzhang. Positioning system of shearer based on UWB technology[J]. Journal of Intelligent Mine,2023,4(11):72-77.
|
| [4] |
SUN Jialan. Enhancing coal mining efficiency:a unified platform for intelligent management and control[J]. International Journal of Distributed Systems & Technologies,2024,15(1). DOI: 10.4018/IJDST.338327.
|
| [5] |
郑江涛,李四海,刘士明,等. 基于惯导和激光雷达的采煤机定位方法[J]. 中国惯性技术学报,2020,28(5):595-602.
ZHENG Jiangtao,LI Sihai,LIU Shiming,et al. Positioning method of a shearer based on inertial navigation and lidar[J]. Journal of Chinese Inertial Technology,2020,28(5):595-602.
|
| [6] |
王世佳. 异类多源信息融合的采煤机定位技术研究[D]. 徐州:中国矿业大学,2021.
WANG Shijia. Research on shearer positioning technology with heterogeneous multi-source information fusion[D]. Xuzhou:China University of Mining and Technology,2021.
|
| [7] |
曹波. 采煤机惯导与超宽带融合定位方法研究[D]. 徐州:中国矿业大学,2022.
CAO Bo. Research on fusion localization approach of IMU and ultra-wideband for shearer[D]. Xuzhou:China University of Mining and Technology,2022.
|
| [8] |
田竹青. 基于BP混合优化的采煤机惯导定位方法研究[J]. 矿业装备,2025(1):175-177. DOI: 10.3969/j.issn.2095-1418.2025.01.057
TIAN Zhuqing. Research on inertial navigation positioning method of shearer based on BP hybrid optimization[J]. Mining Equipment,2025(1):175-177. DOI: 10.3969/j.issn.2095-1418.2025.01.057
|
| [9] |
陈路,谢维斯,谭杰,等. 面向移动机器人的多传感器紧耦合导航定位方法[J/OL]. 电子科技大学学报:1-7 [2025-05-14]. http://kns.cnki.net/kcms/detail/51.1207.TN.20250414.1110.008.html.
CHEN Lu,XIE Weisi,TAN Jie,et al. A tightly coupled multi-sensor fusion navigation and localization method for mobile robots[J/OL]. Journal of University of Electronic Science and Technology of China:1-7[2025-05-14]. http://kns.cnki.net/kcms/detail/51.1207.TN.20250414.1110.008.html.
|
| [10] |
魏岚焘. 煤矿井下UWB定位系统的设计与实现[D]. 包头:内蒙古科技大学,2023.
WEI Lantao. Design and implementation of UWB positioning system in underground coal mine[D]. Baotou:Inner Mongolia University of Science & Technology,2023.
|
| [11] |
戚群涛. 矿井环境下基于改进卡尔曼滤波的UWB定位算法研究[D]. 包头:内蒙古科技大学,2023.
QI Quntao. Research on UWB location algorithm based on improved Kalman filter in underground coal mine environment[D]. Baotou:Inner Mongolia University of Science & Technology,2023.
|
| [12] |
曹波,王世博,葛世荣,等. 基于IMU/UWB的井下采煤工作面端头采煤机定位试验研究[J]. 煤炭科学技术,2023,51(6):217-228.
CAO Bo,WANG Shibo,GE Shirong,et al. Research on shearer positioning experiment based on IMU and UWB at the end of underground coal mining working face[J]. Coal Science and Technology,2023,51(6):217-228.
|
| [13] |
葛世荣,王世佳,曹波,等. 智能采运机组自主定位原理与技术[J]. 煤炭学报,2022,47(1):75-86.
GE Shirong,WANG Shijia,CAO Bo,et al. Autonomous positioning principle and technology of intelligent shearer and conveyor[J]. Journal of China Coal Society,2022,47(1):75-86.
|
| [14] |
CAO Bo,JIANG Mingrui,LI Menglan,et al. Improving accuracy of the IMU/UWB fusion positioning approach utilizing ESEKF and VBUKF for underground coal mining working face[J]. IEEE Internet of Things Journal,2025. DOI: 10.1109/JIOT.2025.3555395.
|
| [15] |
沈国杰,周德胜,郑雪娜,等. 基于UWB的矿井巷道精准三维定位系统设计[J]. 矿业安全与环保,2020,47(6):80-84.
SHEN Guojie,ZHOU Desheng,ZHENG Xuena,et al. Design of precise 3D positioning system for mine roadway based on UWB[J]. Mining Safety & Environmental Protection,2020,47(6):80-84.
|
| [16] |
张海军,孙学成,赵小虎,等. 煤矿井下UWB人员定位系统研究[J]. 工矿自动化,2022,48(2):29-34,41.
ZHANG Haijun,SUN Xuecheng,ZHAO Xiaohu,et al. Research on UWB personnel positioning system in coal mine[J]. Industry and Mine Automation,2022,48(2):29-34,41.
|
| [17] |
LI Shilei,LI Lijing,SHI Dawei,et al. Multi-kernel maximum correntropy Kalman filter for orientation estimation[J]. IEEE Robotics and Automation Letters,2022,7(3):6693-6700. DOI: 10.1109/LRA.2022.3176798
|
| [18] |
LIU Wei,LI Jiapeng,FENG Minyu,et al. Robust distributed adaptation under multikernel correntropy[J]. IEEE Transactions on Circuits and Systems II:Express Briefs,2023,70(1):341-345.
|
| [19] |
DENG Zhihong,SHI Lei,YIN Lijian,et al. UKF based on maximum correntropy criterion in the presence of both intermittent observations and non-Gaussian noise[J]. IEEE Sensors Journal,2020,20(14):7766-7773. DOI: 10.1109/JSEN.2020.2980354
|
| [20] |
黄鑫,张成炜,韦周旺,等. 基于UWB−PDOA的少基站自适应定位系统研究[J]. 测控技术,2024,43(5):85-92.
HUANG Xin,ZHANG Chengwei,WEI Zhouwang,et al. UWB-PDOA based adaptive positioning system with few base stations[J]. Measurement & Control Technology,2024,43(5):85-92.
|
| [21] |
杨海峰,王宇翔. 多模型自校准无迹Kalman滤波方法[J]. 航空动力学报,2024,39(8):415-420.
YANG Haifeng,WANG Yuxiang. Multiple-model self-calibration unscented Kalman filter method[J]. Journal of Aerospace Power,2024,39(8):415-420.
|
Supported by: Beijing Renhe Information Technology Co.,
Ltd. Visits：1441494
DownLoad: