| Citation: |
PAN Junfeng, LIU Shaohong, MA Wentao, et al. Cross fan-shaped roof-cutting blasting technology for preventing rockbursts in gob-side mining roadways[J]. Journal of Mine Automation，2024，50（12）：11-17. DOI: 10.13272/j.issn.1671-251x.18230
|
This study investigated the frequent occurrence of rockbursts in the advanced support areas of gob-side mining roadways. Taking a mine with severe rockburst occurrences as an example, based on an in-depth analysis of the occurrence patterns of 41 rockburst events, an engineering mechanics model of the interaction between the overlying roof of bocal goaf and the lateral goaf was developed. The triggering mechanism was revealed and cross fan-shaped roof-cutting blasting technology for preventing rockburst was proposed. The results showed that lateral support pressure in the gob-side roadways, support pressure in the lateral goaf area, advanced support pressure in the working face, and roadway intersections all have a significant impact on the occurrence of rockbursts. The probability of rockbursts increased with the number of interacting factors, with the combined effect of the overlying thick and hard roof in both the local and the lateral primary goaf as the primary controlling factor. The interaction between these areas formed a right-angle fan-shaped hanging roof structure. The large hanging roof provided static load, which triggered rockbursts, and dynamic load when ultimate collapse occurred, thus acting as the load source for the occurrence of rockbursts. The area influenced by advanced support pressure in the gob-side roadway was identified as the highest-risk zone for rockbursts. Implementing cross fan-shaped roof-cutting blasting technology in this zone effectively shortened the length of the right-angle fan-shaped hanging roof connecting the lateral goaf and the local goaf, thereby reducing the intensity of the dynamic load source. This study provides a novel approach and methodology for preventing and controlling the frequent occurrence of rockbursts during gob-side roadway mining.
| [1] |
潘俊锋,夏永学,王书文,等. 我国深部冲击地压防控工程技术难题及发展方向[J]. 煤炭学报,2024,49(3):1291-1302.
PAN Junfeng,XIA Yongxue,WANG Shuwen,et al. Technical difficulties and emerging development directions of deep rock burst prevention in China[J]. Journal of China Coal Society,2024,49(3):1291-1302.
|
| [2] |
潘一山. 煤矿冲击地压扰动响应失稳理论及应用[J]. 煤炭学报,2018,43(8):2091-2098.
PAN Yishan. Disturbance response instability theory of rockburst in coal mine[J]. Journal of China Coal Society,2018,43(8):2091-2098.
|
| [3] |
齐庆新,李一哲,赵善坤,等. 我国煤矿冲击地压发展70年:理论与技术体系的建立与思考[J]. 煤炭科学技术,2019,47(9):1-40.
QI Qingxin,LI Yizhe,ZHAO Shankun,et al. Seventy years development of coal mine rockburst in China:establishment and consideration of theory and technology system[J]. Coal Science and Technology,2019,47(9):1-40.
|
| [4] |
齐庆新,潘一山,李海涛,等. 煤矿深部开采煤岩动力灾害防控理论基础与关键技术[J]. 煤炭学报,2020,45(5):1567-1584.
QI Qingxin,PAN Yishan,LI Haitao,et al. Theoretical basis and key technology of prevention and control of coal-rock dynamic disasters in deep coal mining[J]. Journal of China Coal Society,2020,45(5):1567-1584.
|
| [5] |
王超,孔令海,王光民,等. 增量荷载作用下沿空工作面冲击地压防治研究[J]. 煤炭工程,2023,55(12):108-113.
WANG Chao,KONG Linghai,WANG Guangmin,et al. Rock burst control of gob-side working face under incremental load[J]. Coal Engineering,2023,55(12):108-113.
|
| [6] |
谭云亮,郭伟耀,辛恒奇,等. 煤矿深部开采冲击地压监测解危关键技术研究[J]. 煤炭学报,2019,44(1):160-172.
TAN Yunliang,GUO Weiyao,XIN Hengqi,et al. Key technology of rock burst monitoring and control in deep coal mining[J]. Journal of China Coal Society,2019,44(1):160-172.
|
| [7] |
门鸿,王晓军,李鹏,等. 特厚煤层综放临空巷道冲击地压综合防治技术应用[J]. 煤炭技术,2024,43(4):161-165.
MEN Hong,WANG Xiaojun,LI Peng,et al. Application of comprehensive control technology of rock burst in extra thick coal seam caving goaf roadway[J]. Coal Technology,2024,43(4):161-165.
|
| [8] |
刘畅,张宇,宋洁,等. 褶曲构造带临空巷道围岩应力演化及冲击地压防治技术[J]. 煤矿安全,2023,54(2):100-106.
LIU Chang,ZHANG Yu,SONG Jie,et al. Stress evolution of surrounding rock and rock burst prevention technology of gob-side roadway in folded structural belt[J]. Safety in Coal Mines,2023,54(2):100-106.
|
| [9] |
陈星,冯美华,尚楠,等. 厚硬顶板宽煤柱临空巷道冲击地压防治技术研究[J]. 煤炭工程,2022,54(1):84-88.
CHEN Xing,FENG Meihua,SHANG Nan,et al. Rock burst control technology for gob-side roadway with thick and hard roof and wide coal pillar[J]. Coal Engineering,2022,54(1):84-88.
|
| [10] |
唐杰兵,鞠文君,陈法兵. 动静载下深井临空巷道冲击破坏分析及防治[J]. 工矿自动化,2021,47(11):88-94,134.
TANG Jiebing,JU Wenjun,CHEN Fabing. Analysis and prevention of impact damage in deep goaf roadway under dynamic and static load[J]. Industry and Mine Automation,2021,47(11):88-94,134.
|
| [11] |
王桂利,孙振于,孟祥贵,等. 特厚煤层临空巷道内错布置防冲研究与实践[J]. 煤炭技术,2021,40(11):46-49.
WANG Guili,SUN Zhenyu,MENG Xianggui,et al. Practice and research on controlling of rock burst by gob-side roadway inner-misaligned of extra thick coal seam[J]. Coal Technology,2021,40(11):46-49.
|
| [12] |
冯龙飞,窦林名,王皓,等. 综放大煤柱临空侧巷道密集区冲击地压机制研究[J]. 采矿与安全工程学报,2021,38(6):1100-1110,1121.
FENG Longfei,DOU Linming,WANG Hao,et al. Mechanism of rockburst in dense roadway area near the goaf of fully-mechanized large pillars[J]. Journal of Mining & Safety Engineering,2021,38(6):1100-1110,1121.
|
| [13] |
苏士杰. 综采过背斜构造临空巷道冲击地压防治技术研究[J]. 煤炭科学技术,2020,48(3):120-125.
SU Shijie. Research on technology of preventing mine rock burst of roadways near gob when fully-mechanized over anticlinal structure[J]. Coal Science and Technology,2020,48(3):120-125.
|
| [14] |
赵雷. 厚硬煤岩临空巷道动静载叠加型冲击地压治理实践[J]. 内蒙古煤炭经济,2020(3):163-165.
ZHAO Lei. Practice of dynamic and static load superposition type impact ground pressure control in thick and hard coal rock roadway[J]. Inner Mongolia Coal Economy,2020(3):163-165.
|
| [15] |
李康,陈建强,赵志鹏,等. 临空巷道冲击地压耦合致灾因素及时空演化过程研究[J]. 煤炭科学技术,2019,47(12):76-82.
LI Kang,CHEN Jianqiang,ZHAO Zhipeng,et al. Study on disaster-causing factors and evolution process of rock burst in roadway near gob[J]. Coal Science and Technology,2019,47(12):76-82.
|
| [16] |
何江,窦林名,王崧玮,等. 坚硬顶板诱发冲击矿压机理及类型研究[J]. 采矿与安全工程学报,2017,34(6):1122-1127.
HE Jiang,DOU Linming,WANG Songwei,et al. Study on mechanism and types of hard roof inducing rock burst[J]. Journal of Mining & Safety Engineering,2017,34(6):1122-1127.
|
| [17] |
卜庆为,辛亚军,王超,等. 交错巷道巷间围岩承载结构稳定性分析[J]. 煤炭学报,2018,43(7):1866-1877.
BU Qingwei,XIN Yajun,WANG Chao,et al. Stability analysis on bearing structure in the surrounding rock between staggered roadways[J]. Journal of China Coal Society,2018,43(7):1866-1877.
|
| [18] |
马宏源,潘俊锋,席国军,等. 坚硬顶板强冲击工作面多巷交叉区域防冲技术[J]. 工矿自动化,2022,48(4):121-127.
MA Hongyuan,PAN Junfeng,XI Guojun,et al. Rock burst prevention technology in multi-roadway intersection area of hard roof strong impact working face[J]. Journal of Mine Automation,2022,48(4):121-127.
|
| [19] |
潘俊锋,刘少虹,高家明,等. 深部巷道冲击地压动静载分源防治理论与技术[J]. 煤炭学报,2020,45(5):1607-1613.
PAN Junfeng,LIU Shaohong,GAO Jiaming,et al. Prevention theory and technology of rock burst with distinguish dynamic and static load sources in deep mine roadway[J]. Journal of China Coal Society,2020,45(5):1607-1613.
|
| [20] |
马文涛,潘俊锋,刘少虹,等. 煤层顶板深孔“钻−切−压”预裂防冲技术试验研究[J]. 工矿自动化,2020,46(1):7-12.
MA Wentao,PAN Junfeng,LIU Shaohong,et al. Experimental research on "drilling-cutting-fracturing" pre-fracturing to prevent rock burst technology for deep hole of roof of coal seam[J]. Industry and Mine Automation,2020,46(1):7-12.
|
| [21] |
孙刘伟,鞠文君,潘俊锋,等. 基于震波CT探测的宽煤柱冲击地压防控技术[J]. 煤炭学报,2019,44(2):377-383.
SUN Liuwei,JU Wenjun,PAN Junfeng,et al. Rock burst prevention technology based on seismic CT detection in wide section coal pillar[J]. Journal of China Coal Society,2019,44(2):377-383.
|
| [1] | CAO Hongli. Research on motion planning and compliance control for mine rescue robots[J]. Journal of Mine Automation, 2024, 50(S2): 188-190,210. |
| [2] | SHI Can, TAN Ziliang, LEI Chao, LI Yunwang, XU Hanfei, HU Qiaowei, JI Zhendong. Optimization of shotcrete manipulator motion trajectory based on AIWCPSO algorithm[J]. Journal of Mine Automation, 2024, 50(12): 155-165. DOI: 10.13272/j.issn.1671-251x.2024080094 |
| [3] | YANG Lin, MA Hongwei, WANG Yan, WANG Chuanwei. Research on motion planning method of underground mobile robot[J]. Journal of Mine Automation, 2020, 46(6): 23-30. DOI: 10.13272/j.issn.1671-251x.17613 |
| [4] | HAN Liang. Position estimation of low-resolution Hall sensors based on current compensatio[J]. Journal of Mine Automation, 2013, 39(7): 46-49. |
| [5] | WANG Hong-jian, TANG Mao-feng, WANG Xue-ming, LIU Yan, SHENG Nan. Design of Mine-used High-precision Oxygen Sensor with Temperature Compensatio[J]. Journal of Mine Automation, 2012, 38(5): 63-65. |
| [6] | CHENG Wen-feng, ZHANG Yao, HUANG Wen-guang. Realization Method of Real-time Motion Pause Function of ACS Motion Controller[J]. Journal of Mine Automation, 2012, 38(1): 105-108. |
| [7] | SONG Zhao-zhao, MA Xiao-ping, BU Li. A New Type of Arc Suppression Coil with Full Compensatio[J]. Journal of Mine Automation, 2011, 37(8): 61-64. |
| [8] | LIU Yong-jun, ZHANG Xin-feng. Error Analysis of Signal Acquisition for Winch and Its Compensatio[J]. Journal of Mine Automation, 2010, 36(8): 113-114. |
| [9] | AN Feng, SHI Li-chen, SONG Jia-hui. Analysis of Motion Stability of Main Head of Tube Alill and Its Fuzzy Optimizatio[J]. Journal of Mine Automation, 2009, 35(4): 49-51. |
| [10] | ZHU Jin-xiu, MIAO Hong-xia. Research and Implementation of Motion Estimation Technology Based on H.264[J]. Journal of Mine Automation, 2004, 30(5): 15-17. |
Supported by: Beijing Renhe Information Technology Co.,
Ltd. Visits：1374542
DownLoad: