竖井掘进机控制系统设计

基金项目:

国家高技术研究发展计划（863计划）资助项目(2012AA06A403)

详细信息

Design of shaft boring machine control system

1.
Institute of Mine Construction, Tiandi Science and Technology Co., Ltd., Beijing 100013, China
2.
Beijing China Coal Mine Engineering Co., Ltd., Beijing 100013, China

摘要: 为保证竖井掘进机稳定、可靠运行，设计了一种基于PLC的竖井掘进机控制系统，介绍了系统组成、工作原理及软硬件设计方案。该系统采用2组PLC，根据工作模式控制相关油泵、刀盘旋转电动机及推进支撑油缸等，并将状态参数上传给本地操作平台及远程控制计算机进行显示。实际应用表明，该系统运行状况良好。
- 竖井掘进机 /
- PLC控制 /
- 刀盘旋转驱动 /
- 液压推进及支撑
Abstract: In order to ensure stable and reliable operation of shaft boring machine, an shaft boring machine control system based on PLC was designed, and composition, working principle and software and hardware design schemes were introduced. The system uses two PLC units to control corresponding oil pump, cutting bar rotating motor and pushing and supporting cylinder according to working mode, and uploads state parameters to local operation platform or remote controlling computer for display. The practical application shows that the system runs well.
- shaft boring machine /
- PLC control /
- cutting bar rotating driving /
- hydraulic pushing and supporting

1.	王卓凡，付文秀，刘学武. 船舶电力系统电弧故障检测及危害评估. 船舶与海洋工程. 2024(03): 29-37 . 百度学术
2.	王伟峰，张方智，刘强，纪晓涵，路翠珍，杨博. 碳电极直径与负载特性对故障电弧断路器响应时间影响研究. 中国安全生产科学技术. 2022(08): 228-234 . 百度学术
3.	屈建宇，马龙涛，陈思磊，葛世伟. 光伏系统直流串联故障电弧检测方法. 电网与清洁能源. 2021(03): 125-130 . 百度学术
4.	崔芮华，王传宇，王洋. VMD-ApEn在航空交流串联型电弧故障检测中的应用. 电机与控制学报. 2020(08): 141-149 . 百度学术
5.	鲍光海，江润. 基于磁通不对称分布的串联电弧故障检测研究. 仪器仪表学报. 2019(03): 54-61 . 百度学术