基于WCF的综合自动化系统联动控制模式

详细信息

Linkage control mode of integrated automation system based on WCF

摘要: 结合综合自动化在煤矿企业的实际应用，对联动控制模式的类型和特点进行了归纳和分类，提出了基于WCF的综合自动化系统联动控制模式，并实现了联动控制接口的规范。该模式将WCF服务寄宿于采集模块中，为平台终端提供联动控制服务，由采集模块实现平台终端和被控制子系统之间交互信息的传递和转换，遵循了原有平台架构，充分利用了采集模块的专职职能。
- 综合自动化 /
- 联动控制 /
- WCF /
- 插件 /
- 接口规范
Abstract: Combining with practical application of integrated automation system in coal mine enterprises, types and characteristics of linkage control modes were concluded and classified, then linkage control mode of integrated automation system based on WCF was proposed, and linkage control interface specifications were achieved. The linkage control mode put WCF service into the acquisition module to provide linkage control services for platform terminal. The acquisition module achieves transmission and conversion of interactive information between platform terminal and controlled subsystem; meanwhile, it follows original platform structure and fully utilizes the special functions of the acquisition module.
- integrated automation /
- linkage control /
- WCF /
- Plug-in /
- interface specificatio

1.	邹丹，高扬. 基于能量谱特征分析的耦合电路故障识别系统. 自动化与仪器仪表. 2022(04): 124-128 . 百度学术
2.	张军，冯运，简子倪，钱晓豪，鄢阳，王先培. 电力设备专用测试装置校准平台测控机制研究. 仪表技术与传感器. 2020(10): 33-37 . 百度学术
3.	祝国源. 开放式电路板通用自动测试平台设计. 自动化仪表. 2020(11): 93-97 . 百度学术
4.	晏勇. 基于工程教育的电路板设计与制作教学改革与应用. 黑龙江工业学院学报(综合版). 2019(04): 28-31 . 百度学术