Citation: | LI Bin, CHEN Jinshuan, HE Bingwei. Research on intelligent speed regulation method of scraper conveyor based on rough neural network[J]. Journal of Mine Automation, 2024, 50(S2): 161-166. |
[1] |
王国法,王虹,任怀伟,等.智慧煤矿2025情景目标和发展路径[J].煤炭学报,2018,43(2):295-305.
|
[2] |
王国法,张德生.煤炭智能化综采技术创新实践与发展展望[J].中国矿业大学学报,2018,47(3):459-467.
|
[3] |
王国法,刘峰,孟祥军,等.煤矿智能化(初级阶段)研究与实践[J].煤炭科学技术,2019,47(8):1-36.
|
[4] |
高有进,杨艺,常亚军,等.综采工作面智能化关键技术现状与展望[J].煤炭科学技术,2021,49(8):1-22.
|
[5] |
王国法,徐亚军,张金虎,等.煤矿智能化开采新进展[J].煤炭科学技术,2021,49(1):1-10.
|
[6] |
李首滨.智能化开采研究进展与发展趋势[J].煤炭科学技术,2019,47(10):102-110.
|
[7] |
WANG Yanping,WANG Shaoying.Coordinated speed planning strategy of scraper conveyor and shearer based on scraper conveyor loads analysis[J].IOP Conference Series:Earth and Environmental Science,2019,267(4):042044.
|
[8] |
葛世荣.煤矿智采工作面概念及系统架构研究[J].工矿自动化,2020,46(4):1-9.
|
[9] |
石勇,林江,崔志芳,等.综采工作面中部跟机自动化控制的数学模型[J].工矿自动化,2016,42(11):14-19.
|
[10] |
乔春光,王学文,谢嘉成,等.基于采煤机运行轨迹的刮板输送机竖直面形态解算方法[J].工程设计学报,2018,25(5):495-502.
|
[11] |
丰岩.薄煤层自动化工作面多机协同控制技术设计与实现[D].西安:西安科技大学,2020.
|
[12] |
陈迪蕾,郑征,黄涛,等.基于采煤机和刮板输送机能耗模型的速度协同优化控制[J].煤炭学报,2022,47(6):2483-2498.
|
[13] |
SWINIARSKI R W,SKOWRON A.Rough set methods in feature selection and recognition[J].Pattern Recognition Letters,2003,24(6):833-849.
|
[1] | ZHENG Wanbo. Study on mine emergency command communication mode based on emergency rescue model[J]. Journal of Mine Automation, 2015, 41(8): 29-34. DOI: 10.13272/j.issn.1671-251x.2015.08.008 |
[2] | ZHAO Si-hai, GUO Yan-chen, ZHOU Jie, LIN Dong-xi. Research of Underground IC Card Identifying On-off Device[J]. Journal of Mine Automation, 2010, 36(11): 86-89. |
[3] | SUN Cheng-zhi. Noncontaction IC Card and Its Application in Intelligent Control of Mine-used Equipment[J]. Journal of Mine Automation, 2008, 34(5): 131-132. |
[4] | TANG Xiao-yan~(, 2). Comparison and Application Analysis of ICE and CORBA[J]. Journal of Mine Automation, 2008, 34(4): 139-142. |
[5] | LI Hao, ZHANG Xiang-yang, LIU Yan-jie. Design Scheme of Full-duplex Communication by Use of Half-duplex IC[J]. Journal of Mine Automation, 2007, 33(6): 90-92. |
[6] | MA Li-ping. Application of Loadometer IC Management System in Qianjiaying Mine Subcompany[J]. Journal of Mine Automation, 2007, 33(4): 101-103. |
[7] | WANG Feng, ZHOU Pei-hua, HOU Hai-jun, FENG Xi-ju. Application of Information Management System Based on Induction IC Card[J]. Journal of Mine Automation, 2004, 30(5): 52-53. |
[8] | YANG Mao-yu. Time Set of Overload Protection Circuit of IC Type in 2.5 kVA Coal Electrical Drill[J]. Journal of Mine Automation, 2004, 30(1): 49-50. |
[9] | SHEN Lin, CHEN Zhi-feng, HU Ju. Development and Application of Read-write System for General IC Card[J]. Journal of Mine Automation, 2000, 26(6): 44-45. |
[10] | ZHANG Jian-ying. Developing of KMB IC Interactive Mixed Card for Industrial TV[J]. Journal of Mine Automation, 1997, 23(2): 30-32. |