LIU Ziwen. Study on dust migration patterns and disturbance deflection dust control technology in fully mechanized mining faces[J]. Journal of Mine Automation,2025,51(1):104-110. DOI: 10.13272/j.issn.1671-251x.2024100027
Citation: LIU Ziwen. Study on dust migration patterns and disturbance deflection dust control technology in fully mechanized mining faces[J]. Journal of Mine Automation,2025,51(1):104-110. DOI: 10.13272/j.issn.1671-251x.2024100027

Study on dust migration patterns and disturbance deflection dust control technology in fully mechanized mining faces

More Information
  • Received Date: October 14, 2024
  • Revised Date: January 23, 2025
  • Available Online: January 25, 2025
  • To address the limited effectiveness of dust prevention technologies such as ventilation dust removal and spray dust suppression in fully mechanized mining faces with high dust concentrations, the study used the 11309 fully mechanized mining face at Shanxi Hongyuan Group Fujiawa Coal Industry Co., Ltd. as a case study. Using Fluent software, a physical model of the mining face was constructed, and numerical simulations were conducted to analyze airflow field distribution characteristics and dust migration patterns. The numerical simulation results indicated that, when positive pressure ventilation ducts were used to supply air to the fully mechanized mining face, the airflow descended along the wall surface and diffused. Influenced by the suction force of the ventilation and dust extraction ducts, the airflow formed vortices, which gradually weakened and disappeared with increasing distance from the mining face. The airflow velocity in the working face area was relatively high, while it gradually decreased along the axial direction of the roadway. Dust concentration decreased as the distance from the mining face increased, with higher dust concentrations observed near the position of the machine operator. Based on these findings, a disturbance deflection dust control technology was proposed based on the concept of using airflow to control dust. By implementing a disturbance deflection device to the positive pressure ventilation duct, optimizing the layout of the duct outlets, and reducing the airflow at the frontmost outlet of the duct, the radial airflow near the machine operator was increased. Additionally, the dust extraction fan's suction duct was moved to the front, altering the airflow direction in the roadway, achieving dust control and removal. Engineering tests verified the reliability of the numerical simulation results and the disturbance deflection device. The results showed that the dust concentration in the fully mechanized mining face significantly decreased after using the disturbance deflection device, with a dust suppression efficiency of over 90%.

  • [1]
    李德文,隋金君,刘国庆,等. 中国煤矿粉尘危害防治技术现状及发展方向[J]. 矿业安全与环保,2019,46(6):1-7,13.

    LI Dewen,SUI Jinjun,LIU Guoqing,et al. Technical status and development direction of coal mine dust hazard prevention and control technology in China[J]. Mining Safety & Environmental Protection,2019,46(6):1-7,13.
    [2]
    徐修平,李刚,金龙哲,等. 矿井采运过程典型粉尘防治技术装备研发与应用[J]. 金属矿山,2022(5):177-184.

    XU Xiuping,LI Gang,JIN Longzhe,et al. Research and application of mine typical dust prevention technology and equipment in the process of mining and transportation[J]. Metal Mine,2022(5):177-184.
    [3]
    张大明,马云东. 综掘工作面风幕控尘除尘系统数值模拟及试验研究[J]. 安全与环境学报,2015,15(4):33-37.

    ZHANG Daming,MA Yundong. Newly developed dust-control and removal system based on the numerical simulation and experimentation[J]. Journal of Safety and Environment,2015,15(4):33-37.
    [4]
    金龙哲,刘建国,林清侠,等. 矿山喷雾降尘技术研究与应用现状综述[J]. 金属矿山,2023(7):2-17.

    JIN Longzhe,LIU Jianguo,LIN Qingxia,et al. Review on the research and application of water spray dust-reduction technology in mines[J]. Metal Mine,2023(7):2-17.
    [5]
    周福宝,袁亮,程卫民,等. 矿井粉尘职业健康防护技术2013—2023年研究进展[J]. 中国安全生产科学技术,2023,19(12):5-15.

    ZHOU Fubao,YUAN Liang,CHENG Weimin,et al. Research progress on occupational health protection technology of mine dust from 2013 to 2023[J]. Journal of Safety Science and Technology,2023,19(12):5-15.
    [6]
    郝宏德,康龙龙,庞杰文,等. 长抽短压通风抽压比对综掘工作面粉尘分布的影响[J]. 煤炭与化工,2024,47(5):87-90.

    HAO Hongde,KANG Longlong,PANG Jiewen,et al. Influence of long pumping and short pressure ventilation pumping pressure ratio on dust distribution in fully mechanized excavation face[J]. Coal and Chemical Industry,2024,47(5):87-90.
    [7]
    龚晓燕,翟项华,陈龙,等. 快掘面抽风口集尘参数变化下粉尘场优化模型研究[J]. 中国安全生产科学技术,2024,20(3):90-96.

    GONG Xiaoyan,ZHAI Xianghua,CHEN Long,et al. Study on dust field optimization model under change of dust collecting parameters of exhaust outlet at fast-tunneling face[J]. Journal of Safety Science and Technology,2024,20(3):90-96.
    [8]
    蒋仲安,曾发镔,王亚朋. 我国金属矿山采运过程典型作业场所粉尘污染控制研究现状与展望[J]. 金属矿山,2021(1):135-153.

    JIANG Zhong'an,ZENG Fabin,WANG Yapeng. Research status and prospect of dust pollution control in typical working places during mining and transportation of metal mines in China[J]. Metal Mine,2021(1):135-153.
    [9]
    肖旸,孙帅强,杨雪儿,等. 可变角度新鲜风流下煤巷掘进长压短抽除尘效果数值模拟[J]. 煤矿安全,2023,54(1):38-45.

    XIAO Yang,SUN Shuaiqiang,YANG Xue'er,et al. Numerical simulation of dust removal effect of long pressure and short drainage in coal roadway tunneling with variable angle fresh air flow[J]. Safety in Coal Mines,2023,54(1):38-45.
    [10]
    孙连胜. 控尘风筒出风口形式变化对掘进工作面粉尘运移的影响研究[J]. 煤矿安全,2023,54(8):45-51.

    SUN Liansheng. Study on the influence of air outlet form change of dust control air duct on dust transport in tunneling working face[J]. Safety in Coal Mines,2023,54(8):45-51.
    [11]
    江丙友,王一凡,林汉毅,等. 煤矿综掘工作面长压短抽除尘性能与尘源移动路径关系[J]. 煤炭学报,2024,49(7):2973-2985.

    JIANG Bingyou,WANG Yifan,LIN Hanyi,et al. Relationship between long pressure short extraction dust removal performance and dust source movement path in comprehensive heading face of coal mines[J]. Journal of China Coal Society,2024,49(7):2973-2985.
    [12]
    牟国礼,郭英俊,李强,等. 付村煤矿综掘通风除尘参数优化及风流-粉尘运移规律研究[J]. 中国煤炭,2020,46(6):63-68. DOI: 10.3969/j.issn.1006-530X.2020.06.015

    MU Guoli,GUO Yingjun,LI Qiang,et al. Research on optimization of ventilation parameters for dust removal and airflow-dust migration law in fully mechanized heading face of Fucun Coal Mine[J]. China Coal,2020,46(6):63-68. DOI: 10.3969/j.issn.1006-530X.2020.06.015
    [13]
    蒋仲安,杨斌,张国梁,等. 高原矿井掘进工作面截割粉尘污染效应及通风控尘参数分析[J]. 煤炭学报,2021,46(7):2146-2157.

    JIANG Zhong'an,YANG Bin,ZHANG Guoliang,et al. Analysis of dust pollution effect of cutting dust and ventilation control parameters at the heading face in plateau mines[J]. Journal of China Coal Society,2021,46(7):2146-2157.
    [14]
    于海里,侯庆亮,李敬国,等. 风流扰动下煤炭装载冲击粉尘运移规律与抑尘技术研究[J]. 中国矿业,2024,33(2):208-216. DOI: 10.12075/j.issn.1004-4051.20230571

    YU Haili,HOU Qingliang,LI Jingguo,et al. Study on the transport law of coal loading impact dust and dust suppression technology under airflow disturbance[J]. China Mining Magazine,2024,33(2):208-216. DOI: 10.12075/j.issn.1004-4051.20230571
    [15]
    杨鹏,崔子岭,闫大鹤,等. 综掘面掘进机扰动下通风除尘参数优化研究[J]. 煤炭技术,2024,43(3):139-143.

    YANG Peng,CUI Ziling,YAN Dahe,et al. Optimization study of ventilation parameters for dust removal under disturbance of tunneling machine in fully mechanized excavation face[J]. Coal Technology,2024,43(3):139-143.
    [16]
    龚晓燕,彭高高,宋涛,等. 掘进工作面长压短抽通风出风口风流调控参数研究[J]. 工矿自动化,2021,47(9):45-52.

    GONG Xiaoyan,PENG Gaogao,SONG Tao,et al. Study on air flow control parameters of long-pressure and short-extraction ventilation air outlets in heading face[J]. Industry and Mine Automation,2021,47(9):45-52.
    [17]
    孙峰. 大断面煤巷掘进工作面综掘机高压外喷雾降尘技术及装备的应用研究[J]. 矿业安全与环保,2019,46(3):52-56. DOI: 10.3969/j.issn.1008-4495.2019.03.011

    SUN Feng. Applied research of the dust removal technology and equipment for high pressure external spray in the large section coal lane[J]. Mining Safety & Environmental Protection,2019,46(3):52-56. DOI: 10.3969/j.issn.1008-4495.2019.03.011
    [18]
    李斌,杨英兵. 神东矿区超远距离掘进工作面粉尘防治技术[J]. 煤炭科学技术,2021,49(增刊2):120-124.

    LI Bin,YANG Yingbing. Dust control technology for ultra-long-distance excavation in Shendong Mining Area[J]. Coal Science and Technology,2021,49(S2):120-124.
    [19]
    关万里,白永亭. 神东矿区现代化掘进工作面一体化高效除尘技术及装备[J]. 中国煤炭,2022,48(增刊1):62-67.

    GUAN Wanli,BAI Yongting. Integrated high-efficiency dust removal technology and equipment for modern heading face in Shendong Mining Area[J]. China Coal,2022,48(S1):62-67.
    [20]
    杨宏刚,王会生,曹莹雪,等. 基于增强角动量的综掘工作面旋流风幕优化数值研究[J]. 采矿技术,2024,24(2):243-249.

    YANG Honggang,WANG Huisheng,CAO Yingxue,et al. Numerical study on optimization of cyclone wind curtain in comprehensive mining face based on enhanced angular momentum[J]. Mining Technology,2024,24(2):243-249.
    [21]
    张凯铭. 综掘工作面粉尘运移规律与风幕控尘除尘技术研究[D]. 西安:西安科技大学,2020.

    ZHANG Kaiming. The migration law of dust and the technology of air curtain dust removal in comprehensive excavation face[D]. Xi'an:Xi'an University of Science and Technology,2020.
  • Related Articles

    [1]GAO Cheng, LIU Liren, ZHENG Lei, LYU Mingjie. Study on airflow-coal dust dispersion pattern and control technology in fully mechanized mining face[J]. Journal of Mine Automation, 2025, 51(1): 111-118. DOI: 10.13272/j.issn.1671-251x.2024100057
    [2]HUANG Chao, TANG Mingyun, WANG Lele, CAI Jianguo, YUAN Yanan. Migration and distribution patterns of cutting dust in a continuous mining face under ventilation disturbance[J]. Journal of Mine Automation, 2024, 50(10): 168-178. DOI: 10.13272/j.issn.1671-251x.2024080046
    [3]LI Changjie, XIN Chuangye, WANG Hao. Effects of air curtain dust control parameters on dust pollution in fully mechanized mining faces[J]. Journal of Mine Automation, 2024, 50(10): 160-167. DOI: 10.13272/j.issn.1671-251x.2024080054
    [4]JIN Bing, ZHANG Lang, LI Wei, ZHENG Yi, LIU Yanqing, ZHANG Yibin. Rapid prediction algorithm for flow field in fully mechanized excavation face based on POD and machine learning[J]. Journal of Mine Automation, 2024, 50(10): 97-104, 119. DOI: 10.13272/j.issn.1671-251x.2024080090
    [5]GONG Xiaoyan, WANG Tianshu, CHEN Long, PEI Xiaoze, LI Xiangbin, ZHU Qianli, NIU Huming. Research on dust settlement under mixed air flow control in fully mechanized excavation face[J]. Journal of Mine Automation, 2024, 50(2): 106-115. DOI: 10.13272/j.issn.1671-251x.2023090022
    [6]ZHANG Jingzhao, SU Huidong, YAN Zhenguo, MA Wenjie, XIONG Shuai, ZHANG Chenyu. Research on dust reduction technology of air chamber in fully mechanized mining face[J]. Journal of Mine Automation, 2024, 50(1): 80-87. DOI: 10.13272/j.issn.1671-251x.2023060062
    [7]ZHOU Quanchao, YANG Shengqiang, JIANG Xiaoyuan, SANG Naiwen. Research on dust distribution law and optimization of ventilation and dust reduction on fully mechanized heading face[J]. Journal of Mine Automation, 2019, 45(11): 70-74. DOI: 10.13272/j.issn.1671-251x.2019050026
    [8]WANG Xu-you, FU Wei. Design of On-line Dust Monitoring and Linkage Spraying and Dust-settling System of Coal Mine[J]. Journal of Mine Automation, 2010, 36(6): 109-112.
    [9]TONG Xia-min~, KANG Dong-liang~, WANG Hu~, TONG Min-ming~. Design of Automatic Control System of Spraying for Dust Suppression on Coal Face[J]. Journal of Mine Automation, 2010, 36(3): 1-3.
    [10]RONG Rong. Design of Monitoring and Control System for Coal Dust[J]. Journal of Mine Automation, 2010, 36(1): 96-98.

Catalog

    Article Metrics

    Article views (50) PDF downloads (7) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return