Volume 47 Issue 11
Turn off MathJax
Article Contents
Abstract
References
Related Articles
ZHOU Rulin, QIAO Zishi, MENG Lingyu. Study on the fast fluid supply and return scheme of hydraulic support column in fully mechanized working face[J]. Journal of Mine Automation, 2021, 47(11): 74-80. DOI: 10.13272/j.issn.1671-251x.2021080006
Citation: ZHOU Rulin, QIAO Zishi, MENG Lingyu. Study on the fast fluid supply and return scheme of hydraulic support column in fully mechanized working face[J]. Journal of Mine Automation, 2021, 47(11): 74-80. DOI: 10.13272/j.issn.1671-251x.2021080006
shu

Study on the fast fluid supply and return scheme of hydraulic support column in fully mechanized working face

  • Beijing Tianma Intelligent Control Technology Co., Ltd., Beijing 100013, China

More Information
  • Received Date: August 02, 2021
  • Revised Date: November 05, 2021
    Graphical Abstract
    • Abstract
  • The hydraulic support automatic follow-up control should have the performance of high support, fast support moving, large moving distance, etc.Among these performance, under the premise of ensuring stope safety, shortening the time of working face empty roof is an extremely critical issue.However, the current hydraulic support automatic follow-up control has problems such as long action time, lower efficiency than manual operation, control parameters set by experience and other problems, resulting in the slow moving speed of the fully mechanized working face, and poor matching of hydraulic system pressure and flow.In order to reduce the action time of the hydraulic support and improve the moving speed of the fully mechanized working face, the flow-pressure mathematical model of the hydraulic support valve-controlled cylinder unit in hydraulic cylinder extension action transient process is established.The analysis shows that the instantaneous pressure of the hydraulic cylinder extension is mainly related to the supply and return hydraulic pressure, and has a quadratic relationship with time.Based on the above conclusions, three schemes for column fast fluid supply and return named direct supply by column liquid supply valve, two-level control + column fast liquid supply valve, and direct supply by electro-hydraulic controlled reversing valve are presented.The working principles of the three schemes are introduced in detail.The simulation models of hydraulic support based on the three schemes are established in AMESim software, and the stability and rapidity of the three schemes are compared by analyzing the transient pressure and action time of the rod cavity and rodless cavity of hydraulic cylinder when the hydraulic support executes the cycle of column lowering-support moving-column lifting under different schemes.The results show that the pressure curves of the rod cavity and rodless cavity of hydraulic cylinder are basically the same when the hydraulic support executes the cycle of column lowering-support moving-column lifting under the three schemes.It is considered that the stability of the three schemes is basically the same.The total time for the hydraulic support to perform the cycle of column lowering-support moving-column lifting under the direct supply by electro-hydraulic controlled reversing valve is the shortest, which is 9.35 s and is 22.1% shorter than the traditional scheme.Therefore, it is concluded that the direct supply scheme by electro-hydraulic controlled reversing valve is the best scheme.
    • FullText(HTML)
    • References (14)
  • [1]
    李昊.智能化综采工作面液压支架自适应跟机关键技术研究[D].北京:中国矿业大学(北京),2020. LI Hao.Research on the key technology of hydraulic support machine-following adaptive control in intelligent fully mechanized mining face[D].Beijing:China University of Mining and Technology(Beijing),2020.
    [2]
    张霖.液压支架自主跟机关键技术研究[D].徐州:中国矿业大学,2017.

    ZHANG Lin.Research on key technologies of autonomous following mining machine for hydraulic support[D].Xuzhou:China University of Mining and Technology,2017.
    [3]
    白永胜,牛剑峰.液压支架电液控制通信网络系统透明化设计[J].煤炭科学技术,2018,46(9):183-187.

    BAI Yongsheng,NIU Jianfeng.Design of transparency of communication network system for electronic-hydraulic control system of hydraulic support[J].Coal Science and Technology,2018,46(9):183-187.
    [4]
    WANG Guofa,PANG Yihui.Surrounding rock control theory and longwall mining technology innovation[J].International Journal of Coal Science & Technology,2017,4(4):301-309.
    [5]
    王国法,范京道,徐亚军,等.煤炭智能化开采关键技术创新进展与展望[J].工矿自动化,2018,44(2):5-12.

    WANG Guofa,FAN Jingdao,XU Yajun,et al.Innovation progress and prospect on key technologies of intelligent coal mining[J].Industry and Mine Automation,2018,44(2):5-12.
    [6]
    王国法,杜毅博.智慧煤矿与智能化开采技术的发展方向[J].煤炭科学技术,2019,47(1):1-10.

    WANG Guofa,DU Yibo.Development direction of intelligent coal mine and intelligent mining technology[J].Coal Science and Technology,2019,47(1):1-10.
    [7]
    王国法,刘峰,孟祥军,等.煤矿智能化(初级阶段)研究与实践[J].煤炭科学技术,2019,47(8):1-36.

    WANG Guofa,LIU Feng,MENG Xiangjun,et al.Research and practice on intelligent coal mine construction(primary stage)[J].Coal Science and Technology,2019,47(8):1-36.
    [8]
    殷英.大流量电液换向阀的动态特性及流场特性仿真[D].太原:太原理工大学,2016. YIN Ying.Simulation on dynamic and flow field characteristics of large flow electro-hydraulic directional valve[D].Taiyuan:Taiyuan University of Technology,2016.
    [9]
    李骏,林福严.跟机自动化中采煤机自动控制方法研究[J].工矿自动化,2014,40(2):1-4.

    LI Jun,LIN Fuyan.Research of automatic control method of shearer in machinery-tracked automation[J].Industry and Mine Automation,2014,40(2):1-4.
    [10]
    于玲,贾春强.综采工作面支架液压系统仿真研究[J].煤矿机械,2014,35(2):56-58.

    YU Ling,JIA Chunqiang.Simulation research on hydraulic system of powered support in fully mechanized face[J].Coal Mine Machinery,2014,35(2):56-58.
    [11]
    刘宝龙.液压支架推移装置参数优化与移架速度研究[D].太原:太原理工大学,2010.

    LIU Baolong.Research on advancing velocity and parameter optimization of passage device of hydraulic support[D].Taiyuan: Taiyuan University of Technology,2010.
    [12]
    黄蕾.大采高液压支架快速移架与姿态控制研究[D].太原:太原科技大学,2017.

    HUANG Lei.Research on rapid transplanting and attitude control of large mining height hydraulic support[D].Taiyuan:Taiyuan University of Science and Technology,2017.
    [13]
    周如林,李首滨,韦文术,等.跟机液压系统压力流量耦合机理研究[J].煤炭科学技术,2020,48(5):129-136.

    ZHOU Rulin,LI Shoubin,WEI Wenshu,et al.Study on coupling mechanism of pressure and flow in following hydraulic system of mining face[J].Coal Science and Technology,2020,48(5):129-136.
    [14]
    吴根茂,邱敏秀,王庆丰,等.新编实用电液比例技术[M].杭州:浙江大学出版社,2010. WU Genmao,QIU Minxiu,WANG Qingfeng,et al.Newly-compiled practical electricity proportion technology[M].Hangzhou:Zhejiang University Press,2010.
    • Related Articles

  • Related Articles

    [1]LI Zhihai, LIU Zhixiang, XIE Miao, LI Yuqi, WANG Shuai. Error modeling and analysis of alternating measurement mode roadheader positioning system[J]. Journal of Mine Automation, 2022, 48(1): 7-15. DOI: 10.13272/j.issn.1671-251x.2021060015
    [2]YAN Bin, CHENG Jianyuan, CAI Yuanli, LI Ping, FENG Hong. Error analysis and compensation of north-seeking system of drilling orientation device in underground coal mine[J]. Journal of Mine Automation, 2019, 45(8): 92-96. DOI: 10.13272/j.issn.1671-251x.2019030034
    [3]HOU Beibei, SONG Yulong, CAO Shuo. An underground positioning algorithm of offset error correction based on RSSI[J]. Journal of Mine Automation, 2017, 43(11): 63-69. DOI: 10.13272/j.issn.1671-251x.2017.11.013
    [4]WANG Suyu, TIAN Jie, WU Miao. Analysis of automatic cutting section boundary control error for longitudinal roadheader[J]. Journal of Mine Automation, 2016, 42(5): 14-18. DOI: 10.13272/j.issn.1671-251x.2016.05.004
    [5]WANG Rong-rong, YANG Hai-zhong. Research of Ultrasonic Ranging Error Compensation Algorithm[J]. Journal of Mine Automation, 2012, 38(12): 62-65.
    [6]LIU Yong-jun, ZHANG Xin-feng. Error Analysis of Signal Acquisition for Winch and Its Compensatio[J]. Journal of Mine Automation, 2010, 36(8): 113-114.
    [7]WANG Kai, PI Zhi-gang, YUAN Peng-tao, SHI Na. Design of Error Fast Measuring System for Gear[J]. Journal of Mine Automation, 2010, 36(4): 109-111.
    [8]YU Yue-sen, QIAN Zhen-hua, PENG Li-ming, LIU Jia. Setting Method of Baud Rate of CAN Bus and Its Error Analysis[J]. Journal of Mine Automation, 2009, 35(6): 52-55.
    [9]CHEN Xi, FU Xing-wu, ZHANG Xing-yuan, CHEN Feng. Application of BP Neural Network in Error Compensation of Distance Measurement[J]. Journal of Mine Automation, 2008, 34(3): 57-58.
    [10]HE Zong-ming. Error Analysis of Short-circuit Current Value by Table Look-up Method[J]. Journal of Mine Automation, 2003, 29(6): 22-23.

  • Cited by

    Periodical cited type(4)

    1. 孙继平，彭铭. 室内电磁波传播衰减统计模型用于矿井的适用性研究. 工矿自动化. 2025(02): 1-8 . 本站查看
    2. 彭铭. 通用无线传输路径损耗统计模型用于矿井的适用性研究. 工矿自动化. 2025(04): 57-63+85 . 本站查看
    3. 孙继平，彭铭，刘斌. 矿井无线传输测试分析与矿用5G优选工作频段研究. 工矿自动化. 2024(10): 1-11+20 . 本站查看
    4. 黄友胜. 矿用定位通信一体化基站设计与实现. 煤矿安全. 2024(12): 229-235 .

    Other cited types(0)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (149) PDF downloads (24) Cited by(4)
    Related

    苏ICP备 05016349号-2

    Supported by: Beijing Renhe Information Technology Co., Ltd. Visits：1255131    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return