LI Shanshan, WEI Yujin, ZHU Haiming, LIU Jiangwen. Research on continuous restrictive pulse train controlled switching converter[J]. Journal of Mine Automation, 2018, 44(7): 54-60. DOI: 10.13272/j.issn.1671-251x.2018030019
Citation: LI Shanshan, WEI Yujin, ZHU Haiming, LIU Jiangwen. Research on continuous restrictive pulse train controlled switching converter[J]. Journal of Mine Automation, 2018, 44(7): 54-60. DOI: 10.13272/j.issn.1671-251x.2018030019

Research on continuous restrictive pulse train controlled switching converter

More Information
  • For larger low-frequency oscillation of pulse train(PT) controlled switching converter under inductor current continuous conduction mode (CCM) which could degrade operation performance of switching converter, a continuous restrictive pulse train (CR-PT) control method was proposed. Operation principle of CR-PT control method and its mechanism of suppressing low frequency oscillation of switching converter were introduced in detail by taking CR-PT controlled Buck converter as an example. Switching mapping model of the CR-PT controlled Buck converter under CCM was established. Output voltage and inductor current of Buck converter were compared under PT control and CR-PT control separately through Matlab simulation and prototype experiment. Research results show that compared with PT control method, CR-PT control method can effectively suppress low-frequency oscillation of switching converter under inductor current CCM through restricting the number of continuous pulses.
  • Related Articles

    [1]JIANG Lei, YANG Liuming, WU Fangda, HAN Huijie, ZHOU Xue. Underground positioning method based on GMapping algorithm and fingerprint map constructio[J]. Journal of Mine Automation, 2017, 43(9): 96-101. DOI: 10.13272/j.issn.1671-251x.2017.09.017
    [2]FANG Xupeng, LI Hui, ZHUANG Jianwei, CHEN Zhiqiao. An identification method for UPS rapid switching[J]. Journal of Mine Automation, 2016, 42(8): 65-69. DOI: 10.13272/j.issn.1671-251x.2016.08.016
    [3]YU Qing-lin, WANG Dong, TANG Dong-xu, LI Cui-la. Design of Mine-used Combination Switch Based on PLC[J]. Journal of Mine Automation, 2011, 37(3): 19-21.
    [4]WANG Xian-bo, BU Wen-shao, DING Zhe, SHAN Dong-liang. Modeling and Simulation of Three-phase PWM Rectifier Based on Fixed Switching Frequency Control Strategy[J]. Journal of Mine Automation, 2010, 36(8): 68-72.
    [5]LI Cui-lan, LI Ping, LUO Ming, LV Zhi-qiang. Intelligent Selective Leakage Protection System for Mine-used Low-voltage Feed Switch Based on PLC[J]. Journal of Mine Automation, 2010, 36(1): 122-124.
    [6]LI Lu, MA Shao-yi. Construction of Mine-map Graph Correction System Based on MapX[J]. Journal of Mine Automation, 2009, 35(11): 115-116.
    [7]JIAO Wen-liang, LI Li-hua. Development of Dynamic Braking Power Supply of High-frequency Switch Based on SPWM[J]. Journal of Mine Automation, 2009, 35(5): 78-80.
    [8]JI Xuan-de, WANG Yu-ya. SVPWM Technology of Switch Mode Determined by Hardware Based on DSP[J]. Journal of Mine Automation, 2008, 34(4): 30-32.
    [9]LI Zu-xin , ZHANG Yu-feng , SHI Xin-ling . A New P-FUZZY-PID Controller with Switching Based on Fuzzy Rules[J]. Journal of Mine Automation, 2003, 29(1): 4-6.
    [10]YANG Jin-zhong. Study of PLC Monitoring and Control System for Mine Used Switch Element[J]. Journal of Mine Automation, 2000, 26(6): 27-28.
  • Cited by

    Periodical cited type(0)

    Other cited types(5)

Catalog

    LIU Jiangwen

    1. On this Site
    2. On Google Scholar
    3. On PubMed

    Article Metrics

    Article views (74) PDF downloads (11) Cited by(5)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return