ZHU Yongping, XU Xiaojian. Development trend of mine frequency converter[J]. Journal of Mine Automation, 2017, 43(10): 18-23. DOI: 10.13272/j.issn.1671-251x.2017.10.004
Citation: ZHU Yongping, XU Xiaojian. Development trend of mine frequency converter[J]. Journal of Mine Automation, 2017, 43(10): 18-23. DOI: 10.13272/j.issn.1671-251x.2017.10.004

Development trend of mine frequency converter

More Information
  • Main problems of mine-used frequency converter were analyzed that input of research and development is insufficient, value exploration is inadequate, pollution to power net is heavy, and use and maintenance is relatively difficult. Development trends of the mine-used frequency converter were expounded in term of explosion-proof technology, variable frequency drive technology and application technology, namely explosion-proof and intrinsically safe is still mainstream of explosion-proof type for the mine-used frequency converter in the future, explosion-proof research of the mine-used frequency converter will focused on optimization design of shell, internal environment control of shell, innovation of heat dissipation technology. Research focuses of the mine-used frequency converter are application of middle and high pressure and high-power inverter, new technologies and devices in the future, clean utilization and energy saving of frequency converter.
  • Related Articles

    [1]WEN Yongzhong, JIA Pengtao, XIA Mingao, ZHANG Longgang, WANG Weifeng. Multi-target detection of underground personnel based on an improved YOLOv8n model[J]. Journal of Mine Automation, 2025, 51(1): 31-37, 77. DOI: 10.13272/j.issn.1671-251x.2024110035
    [2]LU Xiaoya, LI Haifang. Personnel localization method for low-visibility environments based on improved YOLOv3[J]. Journal of Mine Automation, 2024, 50(9): 130-137. DOI: 10.13272/j.issn.1671-251x.2024070085
    [3]SONG Yunzhong, WANG Renhui. Underground target positioning based on differential error suppression optimization method[J]. Journal of Mine Automation, 2020, 46(9): 64-68. DOI: 10.13272/j.issn.1671-251x.2019050056
    [4]TENG Yue, SUN Yanjing, DING Enjie, HUO Yu, YANG Yue, ZHANG Xiaoguang. Mine tagless target location method based on combined space and frequency diversity[J]. Journal of Mine Automation, 2020, 46(7): 82-88. DOI: 10.13272/j.issn.1671-251x.17551
    [5]HU Qingsong, ZHANG Henan, WANG Peng, YANG Wei, LI Shiyin. Non-line-of-sight propagation in object localization: a survey[J]. Journal of Mine Automation, 2020, 46(7): 16-27. DOI: 10.13272/j.issn.1671-251x.17571
    [6]XU Zhiming, TIAN Zijian, WANG Wenqing, LIU Zhenzhen, LIU Ting, HUANG Lei. Region discretization mine target positioning method based on compressed sensing[J]. Journal of Mine Automation, 2018, 44(8): 67-70. DOI: 10.13272/j.issn.1671-251x.2018020005
    [7]ZHAO Tong, LI Xiansheng, ZHANG Lei, DING Enjie, HU Yanjun. Weighted centroid localization algorithm based on node cooperation in coal mine underground[J]. Journal of Mine Automation, 2018, 44(8): 32-38. DOI: 10.13272/j.issn.1671-251x.2018010007
    [8]TIAN Zijian, ZHU Yuanzhong, ZHANG Xiangyang, LIU Yuyang. Application of non line-of-sight error suppression method in mine target locatio[J]. Journal of Mine Automation, 2015, 41(6): 78-82. DOI: 10.13272/j.issn.1671-251x.2015.06.019
    [9]WANG Hai-quan, LIAO Lei, LI Hong-jun, WANG Dong-yu. Design of real-time control system of DC motor based on xPC Target[J]. Journal of Mine Automation, 2013, 39(5): 76-79.
    [10]FU Jun, CHEN Jun-jie. Personnel Localization Algorithms for Wireless Sensor Networks[J]. Journal of Mine Automation, 2009, 35(7): 22-26.
  • Cited by

    Periodical cited type(27)

    1. 邢曦文,蔡玉田. 不同煤种CO释放速率及吸放热特性实验研究. 石油石化绿色低碳. 2024(02): 51-55+77 .
    2. 车德高,朱长海,辛世龙. 价值工程在采空区注浆防灭火技术中的应用探索. 价值工程. 2024(14): 137-140 .
    3. 侯宪港,辛世龙,韦宇翔,秦涛,傅永帅. 注氮条件下大采高综放工作面采空区自燃“三带”的分布规律. 黑龙江科技大学学报. 2024(04): 510-516+536 .
    4. 王庆国,周亮,秦汝祥,刘珍,杨妍妍. 不同预氧化程度焦煤CO_2冷却后自燃特性研究. 工矿自动化. 2023(02): 109-114+156 . 本站查看
    5. 谢承莹,杨建武,陈玉龙. 煤峪口矿综采工作面采空区自燃“三带”分布研究. 山东煤炭科技. 2023(08): 111-113+118 .
    6. 芮国相,刘春,李文龙,韦雪娥. 基于大采高工作面遗煤氧化特征的煤自燃危险区域分布研究. 中国矿业. 2023(09): 151-158 .
    7. 张仲清. 埋管抽采位置及负压变化对采空区煤自燃危险区域的影响. 工矿自动化. 2023(10): 96-103 . 本站查看
    8. 武泽伟,吴康,李洋,梁然,左学海. 东古城煤矿最短自然发火期及采空区“三带”划分的研究. 煤. 2023(12): 6-10 .
    9. 卓聪志. 综放工作面注氮条件下采空区自燃“三带”划分. 江西煤炭科技. 2022(01): 171-173 .
    10. 姜青峰. 祁南矿综采工作面采空区自然发火规律研究. 现代矿业. 2022(02): 203-206 .
    11. 王丹. RVM在煤自燃预测中的应用研究. 煤. 2022(04): 1-5 .
    12. 屈世甲,武福生,贺耀宜. 煤矿安全监测监控体系中边缘计算模式研究. 煤炭科学技术. 2022(05): 247-252 .
    13. 陈小林. 智能化矿山建设背景下的煤矿监管监察模式. 煤矿安全. 2022(08): 237-241 .
    14. 汪瑞,石必明. 朱集西煤矿指标气体确定及自燃“三带”划分研究. 煤炭技术. 2022(09): 99-102 .
    15. 肖乔. 基于ZD5型火情监测系统的煤矿采空区自燃“三带”研究与应用. 煤矿机械. 2022(10): 199-202 .
    16. 赵鸿亮. 皇后煤业15105工作面采空区自燃三带划分技术研究. 现代矿业. 2021(02): 210-213 .
    17. 李会兵. 王庄煤业3801工作面采空区自燃三带划分研究. 煤. 2021(01): 14-16 .
    18. 李玉福. 8.8m超大采高工作面煤自燃防治经验探讨. 工矿自动化. 2021(03): 112-118 . 本站查看
    19. 王春森,程兆辉. 易自燃煤层大采高综采工作面防灭火技术研究. 中国矿山工程. 2021(05): 75-78 .
    20. 王耀强. 浅埋深倾斜工作面采空区自燃“三带”分布研究. 煤炭技术. 2021(11): 110-114 .
    21. 徐晓建. 煤矿安全风险防控及预警系统设计. 工矿自动化. 2020(03): 105-108 . 本站查看
    22. 吴海旭. 上湾煤矿8.8 m超大采高工作面漏风管控技术实践. 中国煤炭. 2020(07): 53-57 .
    23. 王月红,周宁,张九零,朱壮. 不同煤种自燃指标气体优化研究. 河南理工大学学报(自然科学版). 2020(06): 10-15 .
    24. 屈世甲,武福生. 煤矿智能工作面环境安全监测及预警方法研究. 煤矿安全. 2020(08): 132-135 .
    25. 刘宝,穆坤,叶飞,汪帆,王静婷. 基于相关向量机的煤自燃预测方法. 工矿自动化. 2020(09): 104-108 . 本站查看
    26. 李楠. 辛置煤矿10409工作面采空区自燃综合防治技术. 煤. 2019(11): 44-46 .
    27. 姜希印. 易自燃孤岛工作面安全推进速度研究. 工矿自动化. 2019(12): 7-11 . 本站查看

    Other cited types(6)

Catalog

    Article Metrics

    Article views (130) PDF downloads (25) Cited by(33)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return