LIU Zongwei, SONG Jiancheng. Research on off-line data synchronization method of measuring while drilling system[J]. Journal of Mine Automation, 2017, 43(9): 59-65. DOI: 10.13272/j.issn.1671-251x.2017.09.011
Citation: LIU Zongwei, SONG Jiancheng. Research on off-line data synchronization method of measuring while drilling system[J]. Journal of Mine Automation, 2017, 43(9): 59-65. DOI: 10.13272/j.issn.1671-251x.2017.09.011

Research on off-line data synchronization method of measuring while drilling system

More Information
  • An off-line data synchronization method was proposed to solve the problem that attitude data of measuring while drilling system of an ordinary medium or small rotary drilling rig cannot be uploaded on-line. In the method, hole synchronizer and exploring tube at bottom of the hole are used to collect real-time drill-pipe data and attitude data of the borehole respectively during drilling process; after drilling, the synchronizer reads all the attitude data from the exploring tube, and then selects the effective measuring points to drawing trajectory by linking these selected points. Test results show that the off-line data synchronization method realizes synchronization of borehole data and attitude data, can fully meet demands of measurement while drilling of the ordinary medium or small rotary drilling rig without any change of structure of the drilling rig.
  • Related Articles

    [1]MA Zheng, YANG Dashan, ZHANG Tianxiang. Multi-personnel underground trajectory prediction method based on Social Transformer[J]. Journal of Mine Automation, 2024, 50(5): 67-74. DOI: 10.13272/j.issn.1671-251x.2023110084
    [2]SHEN Shuce, SHI Yannan, SONG Jianfeng, REN Ze, WANG Yiying, WANG Hanqiu. Research on trajectory planning of drill rig manipulator based on improved particle swarm optimization[J]. Journal of Mine Automation, 2022, 48(3): 71-77, 85. DOI: 10.13272/j.issn.1671-251x.2021090049
    [3]BAI Sizhong. Research on moving trajectory of intelligent sensor in underground roadway[J]. Journal of Mine Automation, 2022, 48(2): 49-54. DOI: 10.13272/j.issn.1671-251x.2021080081
    [4]WANG Xiaolong, ZHANG Ju. Design of rotary borehole data processing and 3D display software[J]. Journal of Mine Automation, 2021, 47(6): 84-90. DOI: 10.13272/j.issn.1671-251x.2021020002
    [5]ZHANG Wenjie, LIU Zongwei, SONG Jiancheng. Off-line measurement while drilling system for mine-used slewing drilling rig[J]. Journal of Mine Automation, 2019, 45(10): 5-10. DOI: 10.13272/j.issn.1671-251x.2019020032
    [6]GAO Xiaoliang, ZHANG Xianzhen, LU Qianhai. Design of cavity drill bit while drilling for gas drainage of crossing borehole[J]. Journal of Mine Automation, 2019, 45(8): 88-91. DOI: 10.13272/j.issn.1671-251x.17453
    [7]SANG Naiwen, YANG Shengqiang, SONG Yawei. Research on effective drainage radius and rational borehole spacing of parallel boreholes[J]. Journal of Mine Automation, 2019, 45(6): 58-62. DOI: 10.13272/j.issn.1671-251x.2019010048
    [8]LIANG Xiaojun, CHEN Guangzhu, JIANG Chenglin, JING Jianzhong, WU Yuanfang. Error compensation method of mine-used drilling trajectory measurement system[J]. Journal of Mine Automation, 2015, 41(9): 80-83. DOI: 10.13272/j.issn.1671-251x.2015.09.021
    [9]HUANG Linsen, ZHANG Xiantao. Design of data processing software of measurement device while drilling for rotary drilling[J]. Journal of Mine Automation, 2015, 41(7): 112-114. DOI: 10.13272/j.issn.1671-251x.2015.07.028
    [10]WANG Xiao-li, HOU Yuan-bin, WANG Tao. Research of Trajectory Planning of Industrial Robot Based on VC++[J]. Journal of Mine Automation, 2009, 35(5): 34-37.
  • Cited by

    Periodical cited type(1)

    1. 王磊,孙凯,袁瑞甫,齐俊艳. 基于EtherCAT的液压支架智能控制系统研究. 河南理工大学学报(自然科学版). 2025(03): 53-63 .

    Other cited types(0)

Catalog

    Article Metrics

    Article views (36) PDF downloads (11) Cited by(1)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return