Volume 42 Issue 6
Turn off MathJax
Article Contents
Abstract
Related Articles
XIAO Nan, CHEN Zhongxia, CHANG Long, YU Zhihao, GUO Hai. LiFeO4 battery power supply system for mine auxiliary transportation vehicle[J]. Journal of Mine Automation, 2016, 42(6): 12-16. DOI: 10.13272/j.issn.1671-251x.2016.06.004
Citation: XIAO Nan, CHEN Zhongxia, CHANG Long, YU Zhihao, GUO Hai. LiFeO4 battery power supply system for mine auxiliary transportation vehicle[J]. Journal of Mine Automation, 2016, 42(6): 12-16. DOI: 10.13272/j.issn.1671-251x.2016.06.004
shu

LiFeO4 battery power supply system for mine auxiliary transportation vehicle

  • 1.

    College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao 266590, China

  • 2.

    National Ocean Technology Centre, Tianjin 300112, China

More Information
    Abstract
  • For problems of short cycle life and high maintenance cost of existing power supply of domestic mine auxiliary transportation vehicle which uses lead-acid batteries as power supply, the paper proposed application of LiFeO4 battery to the mine vehicle. Firstly, characteristics of the lithium battery group was studied through analyzing influence of cell capacity and resistance characteristics on li-ion battery inconsistency, and then li-ion battery power supply system that can be used for the mine transportation vehicle was developed according to related security standard of coal mine, mainly including li-ion battery pack, battery management system and explosion-proof box. The test results of prototype show that the power supply system can be applied to a variety of auxiliary transportation vehicles, and can meet use requirements.
    • FullText(HTML)
    • References (0)
    • Related Articles

  • Related Articles

    [1]JIANG Lei, YANG Liuming, WU Fangda, HAN Huijie, ZHOU Xue. Underground positioning method based on GMapping algorithm and fingerprint map constructio[J]. Journal of Mine Automation, 2017, 43(9): 96-101. DOI: 10.13272/j.issn.1671-251x.2017.09.017
    [2]FANG Xupeng, LI Hui, ZHUANG Jianwei, CHEN Zhiqiao. An identification method for UPS rapid switching[J]. Journal of Mine Automation, 2016, 42(8): 65-69. DOI: 10.13272/j.issn.1671-251x.2016.08.016
    [3]YU Qing-lin, WANG Dong, TANG Dong-xu, LI Cui-la. Design of Mine-used Combination Switch Based on PLC[J]. Journal of Mine Automation, 2011, 37(3): 19-21.
    [4]WANG Xian-bo, BU Wen-shao, DING Zhe, SHAN Dong-liang. Modeling and Simulation of Three-phase PWM Rectifier Based on Fixed Switching Frequency Control Strategy[J]. Journal of Mine Automation, 2010, 36(8): 68-72.
    [5]LI Cui-lan, LI Ping, LUO Ming, LV Zhi-qiang. Intelligent Selective Leakage Protection System for Mine-used Low-voltage Feed Switch Based on PLC[J]. Journal of Mine Automation, 2010, 36(1): 122-124.
    [6]LI Lu, MA Shao-yi. Construction of Mine-map Graph Correction System Based on MapX[J]. Journal of Mine Automation, 2009, 35(11): 115-116.
    [7]JIAO Wen-liang, LI Li-hua. Development of Dynamic Braking Power Supply of High-frequency Switch Based on SPWM[J]. Journal of Mine Automation, 2009, 35(5): 78-80.
    [8]JI Xuan-de, WANG Yu-ya. SVPWM Technology of Switch Mode Determined by Hardware Based on DSP[J]. Journal of Mine Automation, 2008, 34(4): 30-32.
    [9]LI Zu-xin , ZHANG Yu-feng , SHI Xin-ling . A New P-FUZZY-PID Controller with Switching Based on Fuzzy Rules[J]. Journal of Mine Automation, 2003, 29(1): 4-6.
    [10]YANG Jin-zhong. Study of PLC Monitoring and Control System for Mine Used Switch Element[J]. Journal of Mine Automation, 2000, 26(6): 27-28.

Catalog

    GUO Hai
    • 2.

      National Ocean Technology Centre, Tianjin 300112, China

    1. On this Site
    2. On Google Scholar
    3. On PubMed
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (49) PDF downloads (20) Cited by()
    Related

    苏ICP备 05016349号-2

    Supported by: Beijing Renhe Information Technology Co., Ltd. Visits：1357545    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return