HOU Wenbao, LI Delu, LUO Yanfang, LI Bo. Improved tuning method of arc suppression coil with three phases and five columns in coal mine power grid[J]. Journal of Mine Automation, 2015, 41(4): 90-93. DOI: 10.13272/j.issn.1671-251x.2015.04.023
Citation: HOU Wenbao, LI Delu, LUO Yanfang, LI Bo. Improved tuning method of arc suppression coil with three phases and five columns in coal mine power grid[J]. Journal of Mine Automation, 2015, 41(4): 90-93. DOI: 10.13272/j.issn.1671-251x.2015.04.023

Improved tuning method of arc suppression coil with three phases and five columns in coal mine power grid

More Information
  • For problem that resonance point is difficult to determined which lead to measuring error of capacitive current when arc suppression coil with three phases and five columns in coal mine power grid is tuned by use of resonance method, an improved tuning method was proposed. Admittance triangle composed by fixed side of edge-to-ground conductance and variable sides of edge-to-ground susceptance and admittance according to characteristics of damping ratio unchanged and out-of-resonance degree changed in tuning process. Capacitance current is calculated according to change of admittance angle. The simulation and experimental results show that the improved tuning method has higher measuring accuracy than the resonance method, and measuring error decreases with increase of damping ratio.
  • Related Articles

    [1]ZONG Kai, FU Shichen, LI Yiming, ZHANG Minjun, WANG Pengjiang, WANG Zhilong. Analysis of influence regularity of cutting head load to roadheader's deviation angle[J]. Journal of Mine Automation, 2018, 44(8): 46-51. DOI: 10.13272/j.issn.1671-251x.2018030002
    [2]GUO Wei, LI Hongwei, WANG Yuan, DING Zhibing. Rocker angle measurement method of shearer under low illumination environment[J]. Journal of Mine Automation, 2018, 44(5): 47-51. DOI: 10.13272/j.issn.1671-251x.2017120062
    [3]ZHAO Ming. Shearer rocker swing angle detection device based on gravity acceleratio[J]. Journal of Mine Automation, 2016, 42(6): 16-19. DOI: 10.13272/j.issn.1671-251x.2016.06.005
    [4]ZHANG Lingtao, ZHANG Hui. Measurement algorithm of heading angle of roadheader based on Kalman filter[J]. Journal of Mine Automation, 2014, 40(11): 100-103. DOI: 10.13272/j.issn.1671-251x.2014.11.024
    [5]XU Min, ZHANG Hong-chuan, WANG Shu-hong, MA Yun, FAN Ye. Analysis of influence of initial phase angle of grid electromotive force on startup current of three-phase PWM rectifier[J]. Journal of Mine Automation, 2013, 39(10): 59-63. DOI: 10.7526/j.issn.1671-251X.2013.10.016
    [6]DUAN Lian, DU Gao-xi. Research of Harm Analysis of Capacitance Current of Renlou Coal Mine and Its Treatment[J]. Journal of Mine Automation, 2011, 37(1): 100-102.
    [7]MA Yan, WANG Jian-mi. Application of Radio Frequency Admittance Technology in Detection of Magnetic Material Concentratio[J]. Journal of Mine Automation, 2009, 35(9): 79-81.
    [8]LIU Chun-ying, YAN Jun, HE Ming-xing, WANG Li-guo. Development of On-line Measurement Device of Capacitance Current Based on DSP[J]. Journal of Mine Automation, 2009, 35(8): 126-128.
    [9]HE Hong-jiang, SHAO Zhan-ying. Accurate Measurement of Capacitiance Current Based on DSP[J]. Journal of Mine Automation, 2008, 34(6): 40-43.
    [10]DING Ran, WANG Chong-lin, ZHU Jin-long. Research of Measurement Apparatus of Capacitance Current Based on Signal-injection Method[J]. Journal of Mine Automation, 2007, 33(2): 26-29.

Catalog

    Article Metrics

    Article views (31) PDF downloads (6) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return