QI Dexin, ZHANG Baogang, LI Dongxiao. Improvement of magnetic barriers structure of permanent magnet synchronous motor based on ANSYS[J]. Journal of Mine Automation, 2014, 40(10): 102-105. DOI: 10.13272/j.issn.1671-251x.2014.10.028
Citation: QI Dexin, ZHANG Baogang, LI Dongxiao. Improvement of magnetic barriers structure of permanent magnet synchronous motor based on ANSYS[J]. Journal of Mine Automation, 2014, 40(10): 102-105. DOI: 10.13272/j.issn.1671-251x.2014.10.028

Improvement of magnetic barriers structure of permanent magnet synchronous motor based on ANSYS

More Information
  • Stiffness and strength simulation calculation for magnetic barriers of rotor punching of 200 kW permanent magnet synchronous motor were conducted by use of finite element software ANSYS Workbench, and initial design structure were improved according to the calculation results, that is, a set of magnetic barriers with 1.5 mm width are added in radial magnetic path of hybrid magnetic structure of rotor core, and fit tolerance between the rotor core and shaft is optimized. The simulation results show that the improved structure obviously improves stress distribution of magnetic barriers of the rotor punching and reliability of the permanent magnet synchronous motor. It provides design basis for rotor punching of permanent magnet synchronous motor.
  • Related Articles

    [1]DU Wenzheng, MA Baozhu, CAO Dazhi, FU Guanglei, XIE Zheng. Analysis of affection of friction factor on stress and fatigue life of steel wire rope[J]. Journal of Mine Automation, 2017, 43(3): 43-47. DOI: 10.13272/j.issn.1671-251x.2017.03.010
    [2]WANG Bo, SONG Yubin, WANG Xin. Goal driven optimization design of flameproof shell based on ANSYS Workbench[J]. Journal of Mine Automation, 2015, 41(12): 70-72. DOI: 10.13272/j.issn.1671-251x.2015.12.019
    [3]SUN Yu, LIU Li. Optimization design of complex flameproof enclosure based on finite element analysis[J]. Journal of Mine Automation, 2015, 41(4): 52-54. DOI: 10.13272/j.issn.1671-251x.2015.04.014
    [4]ZHU Defu, XING Cu'en, QIAO Gangjie. Construction of 3D coal seam model based on improved triangular prism element[J]. Journal of Mine Automation, 2014, 40(7): 22-24. DOI: 10.13272/j.issn.1671-251x.2014.07.007
    [5]SUN Wen, ZHANG Xinghua. Efficiency optimization of direct torque control for permanent magnet synchronous motor[J]. Journal of Mine Automation, 2014, 40(3): 56-59. DOI: 10.13272/j.issn.1671-251x.2014.03.016
    [6]HU Wan-qing, HU Qing-yi, LIN Xue, LIN Shan-ming. Research of temperature monitoring system for cable joint based on temperature field[J]. Journal of Mine Automation, 2013, 39(6): 90-93.
    [7]WANG Ye, ZHANG Chun-li, WANG Fu-long, FAN Wen-sheng. Research of Caving Methods Based on Discrete Element[J]. Journal of Mine Automation, 2010, 36(5): 27-29.
    [8]DAI Xue-fe. Finite Element Analysis and Optimization Design of Movable Arm of Loader's Working Equipment Based on Pro/E[J]. Journal of Mine Automation, 2010, 36(4): 50-52.
    [9]WANG Run-sheng, KANG Zhi-qiang, ZHOU Rui-long, YU Yang, GUO Jian-wen. Simulation Research of Bolt Supporting of Physical Tunnel in Tectonic Stress Field Based on ANSYS[J]. Journal of Mine Automation, 2010, 36(1): 32-36.
    [10]SONG Wei, ZHANG Xin, WANG Lei. Optimization Design of Elastomer Structure of Strain Type Six-dimensional Pressure Sensor Based on Orthogonal Test[J]. Journal of Mine Automation, 2009, 35(10): 60-62.

Catalog

    LI Dongxiao

    1. On this Site
    2. On Google Scholar
    3. On PubMed

    Article Metrics

    Article views (147) PDF downloads (23) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return