Volume 45 Issue 10
Turn off MathJax
Article Contents
Abstract
Related Articles
SUN Jiping, CHEN Huisheng. Smart mine with 5G and WiFi6[J]. Journal of Mine Automation, 2019, 45(10): 1-4. DOI: 10.13272/j.issn.1671-251x.17517
Citation: SUN Jiping, CHEN Huisheng. Smart mine with 5G and WiFi6[J]. Journal of Mine Automation, 2019, 45(10): 1-4. DOI: 10.13272/j.issn.1671-251x.17517
shu

Smart mine with 5G and WiFi6

  • China University of Mining and Technology(Beijing), Beijing 100083, China

More Information
    Graphical Abstract
    • Abstract
  • Broadband wireless communication is foundation and key of smart mine construction. Special requirements for mine broadband wireless communication were proposed. Wireless signal is required to cover roadway more than 10 kilometers coal mine underground. Wireless transmission must be intrinsically safe. Wireless working frequency band should not be too high. Wireless transmission should have certain diffraction ability. Anti-interference ability is strong. Mobility requirements are not high. Mine-used 5G and WiFi6 were researched. Both 5G and WiFi6 can be used for broadband wireless communication in smart mine. Mine-used 5G has advantages of high transmission rate, small transmission delay and high call quality, but the system is complex and cost is high.Mine-used WiFi6 has advantages of high transmission rate, simple system and low cost, but transmission delay is large and call quality is poor.
    • FullText(HTML)
    • References (0)
    • Related Articles

  • Related Articles

    [1]WU Wenqian, ZHEN Weiqi, MEN Shaobin, ZHAO Longlong. Decision model of shearer drum intelligent height adjustment based on rough set-RBF neural network[J]. Journal of Mine Automation, 2024, 50(S2): 167-172.
    [2]MIAO Bing, GE Shirong. Theory and method of shearer digital twin navigation cutting motion planning[J]. Journal of Mine Automation, 2024, 50(8): 1-13. DOI: 10.13272/j.issn.1671-251x.2024070063
    [3]LI Zhongzhong, YAO Yupeng. A generation method for the cutting height template of the shearer drum based on working condition triggering[J]. Journal of Mine Automation, 2024, 50(4): 144-152. DOI: 10.13272/j.issn.1671-251x.2024010097
    [4]LI Zhongzhong, LIU Qing. Automatic height adjustment technology of shearer based on cutting roof and floor height prediction model[J]. Journal of Mine Automation, 2024, 50(1): 9-16. DOI: 10.13272/j.issn.1671-251x.2023060044
    [5]YUAN Gang. A constant power cutting method of continuous shearer based on fuzzy control[J]. Journal of Mine Automation, 2020, 46(7): 117-122. DOI: 10.13272/j.issn.1671-251x.2020010007
    [6]ZHANG Sihan, LIU Zhenjian, QIU Jinbo. Research on model predictive control model in application of shearer height-adjusting system[J]. Journal of Mine Automation, 2018, 44(5): 42-46. DOI: 10.13272/j.issn.1671-251x.2017120009
    [7]YUAN Bin, WANG Yiliang, YANG Zhaojian. Simulation analysis of shearer drum cutting coal-rock under oblique cutting conditio[J]. Journal of Mine Automation, 2018, 44(1): 64-68. DOI: 10.13272/j.issn.1671-251x.2018.01.2017090011
    [8]CHEN Jinguo, LIU Chunsheng, FAN Jianhong, ZHANG Yanjun, WAN Feng. Modeling and simulation of drum height adjusting system of shearer[J]. Journal of Mine Automation, 2017, 43(10): 78-82. DOI: 10.13272/j.issn.1671-251x.2017.10.016
    [9]LIU Qingguo, CAO Peng. Improved memory program control strategy of height adjustment of shearer roller[J]. Journal of Mine Automation, 2017, 43(1): 34-37. DOI: 10.13272/j.issn.1671-251x.2017.01.009
    [10]ZHANG Jun-mei , LI Wen-bin , FAN Xun , KANG Feng-yi . Automatic Control System of Height Setting of Shearer Based on Single-chip Microcomputer[J]. Journal of Mine Automation, 2004, 30(1): 6-9.

  • Cited by

    Periodical cited type(10)

    1. 张福锁. 基于数据融合的井下连续采煤机自动定位方法的研究. 自动化应用. 2023(14): 180-182 .
    2. 葛世荣，王世佳，曹波，王世博，吕嘉晨. 智能采运机组自主定位原理与技术. 煤炭学报. 2022(01): 75-86 .
    3. 孙梦祯，李娟莉，谢嘉成，李素华. 综采工作面虚拟监测系统界面交互设计. 包装工程. 2022(06): 134-142 .
    4. 曹建东. 煤矿综采工作面采煤机截割系统方案设计与应用. 机械管理开发. 2022(06): 227-228+231 .
    5. 胡相捧，刘新华. 初撑阶段的支架位姿与驱动千斤顶一一映射及调整策略. 采矿与安全工程学报. 2021(04): 666-677 .
    6. 武俊，刘瀚文. 基于捷联惯导系统的采煤机定位方法. 工矿自动化. 2021(S2): 19-22 . 本站查看
    7. 刘瀚文. 基于捷联惯导系统的采煤机定位技术. 能源与环保. 2021(08): 221-224 .
    8. 巩剑波，任文永，郭帅. 采煤机姿态矫正系统研究综述. 煤炭技术. 2020(01): 158-161 .
    9. 张丹，郝尚清，宋胜伟. 运动状态检测的采煤机捷联惯导系统误差组合算法. 黑龙江科技大学学报. 2019(03): 299-303 .
    10. 刘宇，陈根林，刘永忠. 煤矿全断面掘进机捷联惯导曲线测量系统. 工矿自动化. 2019(08): 65-69+73 . 本站查看

    Other cited types(11)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (415) PDF downloads (112) Cited by(21)
    Related

    苏ICP备 05016349号-2

    Supported by: Beijing Renhe Information Technology Co., Ltd. Visits：1225286    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return