斜切工况下采煤机滚筒截割煤岩仿真分析

原彬, 王义亮, 杨兆建

原彬,王义亮,杨兆建.斜切工况下采煤机滚筒截割煤岩仿真分析[J].工矿自动化,2018,44(1):64-68.. DOI: 10.13272/j.issn.1671-251x.2018.01.2017090011
引用本文: 原彬,王义亮,杨兆建.斜切工况下采煤机滚筒截割煤岩仿真分析[J].工矿自动化,2018,44(1):64-68.. DOI: 10.13272/j.issn.1671-251x.2018.01.2017090011
YUAN Bin, WANG Yiliang, YANG Zhaojian. Simulation analysis of shearer drum cutting coal-rock under oblique cutting conditio[J]. Journal of Mine Automation, 2018, 44(1): 64-68. DOI: 10.13272/j.issn.1671-251x.2018.01.2017090011
Citation: YUAN Bin, WANG Yiliang, YANG Zhaojian. Simulation analysis of shearer drum cutting coal-rock under oblique cutting conditio[J]. Journal of Mine Automation, 2018, 44(1): 64-68. DOI: 10.13272/j.issn.1671-251x.2018.01.2017090011

斜切工况下采煤机滚筒截割煤岩仿真分析

基金项目: 

山西省煤基重点科技攻关项目(MJ2014-05-02)

山西省研究生联合培养基地人才培养项目(2016JD14)

详细信息
  • 中图分类号: TD421.6

Simulation analysis of shearer drum cutting coal-rock under oblique cutting conditio

  • 摘要: 为研究斜切工况下采煤机滚筒的运动规律及受力特性,利用ADAMS建立了斜切工况下采煤机虚拟样机模型,通过运动仿真得到了斜切工况下采煤机滚筒运动曲线,并以该曲线作为滚筒运动边界条件;采用LS-DYNA对斜切工况下采煤机滚筒截割煤岩进行了模拟仿真,得到了斜切工况下滚筒受力特性。仿真结果表明:斜切工况下滚筒的截割阻力和牵引阻力逐步增大并最终趋于稳定,且截割阻力约为牵引阻力的2倍;滚筒轴向力呈先增大后减小趋势,最大轴向力出现在滚筒轴向位移达到最大时,且滚筒轴向力与轴向位移密切相关;滚筒力矩主要由截割阻力和轴向力产生,且力矩大小变化趋势与产生力矩的作用力的变化趋势一致。
    Abstract: In order to study movement rule and force characteristic of shearer drum under oblique cutting condition, virtual prototype model of shearer under oblique cutting condition was established by use of ADAMS, and movement curve of shearer drum was obtained through motion simulation, which was used as drum movement boundary condition. LS-DYNA was used to simulate shearer drum cutting coal-rock under oblique cutting condition, and force characteristic of drum under oblique cutting condition was obtained. The simulation results show that cutting resistance and traction resistance of drum gradually increase and eventually become stable under oblique cutting condition, and the cutting resistance is 2 times as much as the traction resistance. Axial force of drum first increases and then decreases, the maximum axial force occurs when axial displacement of drum reaches the maximum, and the axial force and axial displacement of drum are closely related. Torque of drum is mainly generated by the cutting resistance and the axial force, and change trend of the torque is consistent with that of the force generating the torque.
  • 期刊类型引用(14)

    1. 马丙太,吴昊,周一文,嵇文磊,汪洋,赵德刚. 基于IPTA和SBAS-InSAR的闭坑矿井地表残余变形监测. 能源与环保. 2025(03): 123-128 . 百度学术
    2. 张曦,姜川,李叶繁,苑雨,李昊. 集成IPTA与SBAS煤矿地表沉降监测与分析——以河南新密芦沟煤矿为例. 中国煤炭地质. 2025(03): 64-70 . 百度学术
    3. 桂智琛,徐良骥,汪纳川. 淮南关闭矿井地表沉降分析与预测. 测绘科学. 2025(04): 103-113 . 百度学术
    4. 桂智琛,徐良骥,刘潇鹏,曹宗友. 基于时序InSAR的关闭矿井地表残余沉降监测. 绿色矿山. 2024(01): 54-63 . 百度学术
    5. 许时昂,吴海波,欧元超,席超强. 采煤沉陷松散层变形研究现状与分析. 科学技术与工程. 2024(17): 6999-7013 . 百度学术
    6. 郑美楠,邓喀中,郭庆彪,赵若南,秦锡鹏. 淮南矿区关闭矿井地表次生沉陷InSAR监测与规律分析. 武汉大学学报(信息科学版). 2024(08): 1356-1366 . 百度学术
    7. 刘增波,徐良骥,张坤,刘潇鹏,曹宗友,徐阳. 融合SBAS-InSAR与CS-SVM的矿区地表残余沉降预测模型. 金属矿山. 2024(08): 133-139 . 百度学术
    8. 姜川,王磊杰,樊高强,李昊,李叶繁,苑雨,张曦. 基于SBAS-InSAR的郑州煤炭矿区地表沉降监测及演化规律分析. 中国煤炭. 2024(10): 158-165 . 百度学术
    9. 魏勇,吉坤,阎鸣泽,李晅辉,刘迎,李宏,韩斌,戴靠山. 基于RSM-BBD方法的关闭/废弃矿井地热系统长期采热性能研究. 矿业研究与开发. 2024(12): 273-282 . 百度学术
    10. 张连蓬,梁亮,陈炳乾,胡晋山,于洋,秦璐,余昊,杨家乐,杨宇. 基于SBAS-InSAR技术的关闭矿井地表多维形变时空监测与分析方法. 金属矿山. 2023(01): 83-94 . 百度学术
    11. 高玉荣,隋刚,张新军,孔嘉嫄,张和生. 遥感方法在宁武煤田煤火识别中的应用. 煤炭科学技术. 2023(05): 133-139 . 百度学术
    12. 褚召祥. 基于体积法的废弃煤矿水热型热储潜能评估. 工程地质学报. 2023(05): 1696-1710 . 百度学术
    13. 秦锡鹏,邓喀中,郑美楠,王刘宇. 徐州西部关闭矿井地表次生沉陷监测与分析. 测绘科学. 2022(08): 247-254 . 百度学术
    14. 梁思语,胡海峰. 基于SBAS-InSAR技术的采空区残余变形规律分析. 中国矿业. 2022(12): 70-78 . 百度学术

    其他类型引用(5)

计量
  • 文章访问数:  65
  • HTML全文浏览量:  8
  • PDF下载量:  11
  • 被引次数: 19
出版历程
  • 刊出日期:  2018-01-09

目录

    YANG Zhaojian

    1. On this Site
    2. On Google Scholar
    3. On PubMed

    /

    返回文章
    返回