压滤机入料系统MTPA—DTC效率优化方法

基金项目:

科技型中小企业技术创新基金项目(11C26213204616)

江苏省普通高校研究生科研创新计划项目(CXZZ13_0930)

详细信息

MTPA-DTC efficiency optimization method for feeding system of pressure filter

1.
Yongmei Company, Henan Energy and Chemical Industry Group Co., Ltd., Shangqiu 476600, China
2.
School of Information and Electrical Engineering, China University of Mining and Technology, Xuzhou 221

摘要: 为了提升压滤机入料系统的实际运行效率，提出了一种将最大转矩电流比应用于直接转矩控制的效率优化方法。该方法根据实际电磁转矩的变化，在线动态地调节定子磁链的幅值，以获得单位电流幅值下的最大转矩输出效果。实验结果表明，该方法在相同的电磁转矩下仅需较小的定子电流即可实现全负载范围内的系统效率优化。
- 压滤机 /
- 入料系统 /
- 永磁同步电动机 /
- 最大转矩电流比 /
- 直接转矩控制
Abstract: In order to improve actual operation efficiency of feeding system of pressure filter, an efficiency optimization method with the maximum torque per ampere applied in direct torque control was proposed. The method adjusts amplitude of stator flux linkage dynamically based on actual changing of electromagnetic torque, so as to achieve the maximum torque output under unit current amplitude. The experimental results show that the method can realize efficiency optimization of the system in the whole load range with smaller stator current under the same electromagnetic torque.
- pressure filter /
- feeding system /
- permanent magnet synchronous motor /
- maximum torque per ampere /
- direct torque control