Research and development of mixing humidification experimental device of atomization and water bath
-
摘要: 现有用于空气湿度与煤低温氧化规律的加湿装置基本采用单一加湿方法,加湿精度较低,加湿变化范围较小,未完全实现自动化加湿。针对以上问题,基于热湿交换原理,提出了水浴和高压雾化相结合的混合加湿方法,研制了雾化和水浴混合加湿实验装置。该装置通过水浴和雾化分步联合进行加湿,空气通过进气管进入箱体与装置底部的水接触,实现水浴加湿;水浴加湿后的空气从水面出来后继续与箱体内经过高压雾化的水雾接触,从而实现高压雾化加湿。装置出气口处装有湿度控制器,湿度控制器根据需要可以进行不同相对湿度的设置,能够对装置内的空气进行实时检测,从而实现空气加湿的精准控制。水浴和高压雾化相结合的混合加湿方法既缩短了空气加湿时间,又扩大了装置的湿度调节范围,实现了不同范围的加湿需求。Abstract: The existing humidification device for air humidity and low temperature oxidation of coal basically adopts a single humidification method,which has low humidification accuracy,small humidification range and incomplete automatic humidification. In view of the above problems,based on the heat and humidity exchange principle,a mixing humidification method combining with water bath and high pressure atomization was proposed,and a mixing humidification experimental device of atomization and water bath was developed. The device realizes humidification by water bath and atomization step by step. The air enters the box through inlet pipe and contacts with water at the bottom of the device to realize water bath humidification. After the humidification of water bath,the air comes out from the water and continues to contact with the water mist in the box after high-pressure atomization,thus realizing high-pressure atomization and humidification. The air outlet of the device is equipped with a humidity controller,which can set different relative humidity according to the needs,and can detect the air in the device in real-time,so as to achieve accurate control of air humidification. The mixing humidification method of water bath and high pressure atomization not only shortens the humidification time of the air,but also enlarges the humidity regulation range of the device,so as to realize the humidification needs of different ranges.
-
-
期刊类型引用(7)
1. 李维宇,王玉璟. 动态协同算法在挖掘机器人控制的优化研究. 机械设计与制造. 2024(06): 331-337 . 百度学术
2. 马宏伟,苏浩,薛旭升,李超,郭逸风,王星,周文剑,崔闻达,喻祖坤,成佳帅. 煤矿井下移动机器人激光标靶定位方法研究. 煤炭科学技术. 2024(11): 60-73 . 百度学术
3. 万继成,张旭辉,杨文娟,张超,雷孟宇,杜昱阳,董征,杨骏豪. 基于红外LED线型标靶的掘进机视觉定位方法研究. 煤炭学报. 2024(S2): 1173-1183 . 百度学术
4. 葛世荣,胡而已,李允旺. 煤矿机器人技术新进展及新方向. 煤炭学报. 2023(01): 54-73 . 百度学术
5. 郑学召,严瑞锦,蔡国斌,王宝元,何芹健. 矿井动目标精确定位技术及优化方法研究. 工矿自动化. 2023(02): 14-22 . 本站查看
6. 李鹏程,郝文静,闫红玲. 狭窄空间智能巡检机器人设计及运动分析. 运城学院学报. 2023(06): 42-46 . 百度学术
7. 马宏伟,晁勇,薛旭升,毛清华,王川伟. 基于双目视觉的掘锚机器人行驶位移检测方法. 工矿自动化. 2022(12): 16-25 . 本站查看
其他类型引用(5)
计量
- 文章访问数: 51
- HTML全文浏览量: 13
- PDF下载量: 16
- 被引次数: 12