Parameterized modeling and analysis system of shearer key parts

XIE Aizheng; DING Hua; WANG Yiliang

doi:10.13272/j.issn.1671-251x.2017090014

Volume 44 Issue 3

Turn off MathJax

Article Contents

Article Navigation > Journal of Mine Automation > 2018 > 44(3): 97-101

XIE Aizheng, DING Hua, WANG Yiliang. Parameterized modeling and analysis system of shearer key parts[J]. Industry and Mine Automation, 2018, 44(3): 97-101. doi: 10.13272/j.issn.1671-251x.2017090014

Citation:

XIE Aizheng, DING Hua, WANG Yiliang. Parameterized modeling and analysis system of shearer key parts[J]. Industry and Mine Automation, 2018, 44(3): 97-101. doi: 10.13272/j.issn.1671-251x.2017090014

XIE Aizheng, DING Hua, WANG Yiliang. Parameterized modeling and analysis system of shearer key parts[J]. Industry and Mine Automation, 2018, 44(3): 97-101. doi: 10.13272/j.issn.1671-251x.2017090014

Citation:

XIE Aizheng, DING Hua, WANG Yiliang. Parameterized modeling and analysis system of shearer key parts[J]. Industry and Mine Automation, 2018, 44(3): 97-101. doi: 10.13272/j.issn.1671-251x.2017090014

PDF( 1283 KB)

Parameterized modeling and analysis system of shearer key parts

doi: 10.13272/j.issn.1671-251x.2017090014

XIE Aizheng^{1, 2},
DING Hua^{1, 2},
WANG Yiliang^{1, 2}

1.
College of Mechanical Engineering, Taiyuan University of Technology, Taiyuan 030024, China
2.
Shanxi Key Laboratory of Fully Mechanized Coal Mining Equipment, Taiyuan 030024, China

Publish Date: 2018-03-10

Abstract

Abstract

In order to improve efficiency of modeling and finite element analysis of shearer key parts and reduce requirement for software opertation level of user, a parameterized modeling and analysis system of shearer key parts was developed by use of NX secondary development tool under Visual Studio 2012 integrated compilation environment. The system associates parameters entered by the user with interface functions in application programs, and uses dimension driving method to modify parameterized expressions, so as to achieve parameterized modeling of shearer key parts. Parameterization of finite element analysis is realized by acquiring NX NASTRAN interface function with Journal tool. The effectiveness of the system is verified by an example.
- coal mining,
- shearer,
- parts parametrization,
- finite element analysis,
- NX secondary development