Design of shaft boring machine control system

YANG Bingwen; FU Wenjun; LIU Zhiqiang

doi:10.13272/j.issn.1671-251x.2016.09.002

Volume 42 Issue 9

Turn off MathJax

Article Contents

Article Navigation > Journal of Mine Automation > 2016 > 42(9): 5-8

YANG Bingwen, FU Wenjun, LIU Zhiqiang. Design of shaft boring machine control system[J]. Industry and Mine Automation, 2016, 42(9): 5-8. doi: 10.13272/j.issn.1671-251x.2016.09.002

Citation:

YANG Bingwen, FU Wenjun, LIU Zhiqiang. Design of shaft boring machine control system[J]. Industry and Mine Automation, 2016, 42(9): 5-8. doi: 10.13272/j.issn.1671-251x.2016.09.002

YANG Bingwen, FU Wenjun, LIU Zhiqiang. Design of shaft boring machine control system[J]. Industry and Mine Automation, 2016, 42(9): 5-8. doi: 10.13272/j.issn.1671-251x.2016.09.002

Citation:

YANG Bingwen, FU Wenjun, LIU Zhiqiang. Design of shaft boring machine control system[J]. Industry and Mine Automation, 2016, 42(9): 5-8. doi: 10.13272/j.issn.1671-251x.2016.09.002

PDF( 557 KB)

Design of shaft boring machine control system

doi: 10.13272/j.issn.1671-251x.2016.09.002

YANG Bingwen^{1, 2},
FU Wenjun^{1, 2},
LIU Zhiqiang^{1, 2}

1.
Institute of Mine Construction, Tiandi Science and Technology Co., Ltd., Beijing 100013, China
2.
Beijing China Coal Mine Engineering Co., Ltd., Beijing 100013, China

Publish Date: 2016-09-10

Abstract

Abstract

In order to ensure stable and reliable operation of shaft boring machine, an shaft boring machine control system based on PLC was designed, and composition, working principle and software and hardware design schemes were introduced. The system uses two PLC units to control corresponding oil pump, cutting bar rotating motor and pushing and supporting cylinder according to working mode, and uploads state parameters to local operation platform or remote controlling computer for display. The practical application shows that the system runs well.
- shaft boring machine,
- PLC control,
- cutting bar rotating driving,
- hydraulic pushing and supporting