Design of mine-used ungrounded feed state sensor

HUANG Chun

doi:10.13272/j.issn.1671-251x.2016.01.003

Volume 42 Issue 1

Turn off MathJax

Article Contents

Article Navigation > Journal of Mine Automation > 2016 > 42(1): 7-9

HUANG Chun. Design of mine-used ungrounded feed state sensor[J]. Industry and Mine Automation, 2016, 42(1): 7-9. doi: 10.13272/j.issn.1671-251x.2016.01.003

Citation:

HUANG Chun. Design of mine-used ungrounded feed state sensor[J]. Industry and Mine Automation, 2016, 42(1): 7-9. doi: 10.13272/j.issn.1671-251x.2016.01.003

HUANG Chun. Design of mine-used ungrounded feed state sensor[J]. Industry and Mine Automation, 2016, 42(1): 7-9. doi: 10.13272/j.issn.1671-251x.2016.01.003

Citation:

HUANG Chun. Design of mine-used ungrounded feed state sensor[J]. Industry and Mine Automation, 2016, 42(1): 7-9. doi: 10.13272/j.issn.1671-251x.2016.01.003

PDF( 518 KB)

Design of mine-used ungrounded feed state sensor

doi: 10.13272/j.issn.1671-251x.2016.01.003

HUANG Chun^{1, 2}

1.
CCTEG Chongqing Research Institute, Chongqing 400039, China
2.
Chongqing Engineering Research Center of Key Technologies of Mine Internet of Things, Chongqing 400039, China

Publish Date: 2016-01-10

Abstract

Abstract

In view of problem that existing feed state sensor need to be grounded and it is susceptible to interference, a design scheme of mine-used ungrounded feed state sensor was proposed. The sensor wraps signal probes on the load side cable, and uses shield for anti-interference processing of electrode plates, it ensures that the plates and the signal processing circuit use the same reference, and can accurately detect the feed status in the case of ungrounded.
- feed state sensor,
- grounding handling,
- anti-interference handling