Design of high-speed modem in drilling rescue

QIU Xingguo; FANG Yisong; LIU Zheng

doi:10.13272/j.issn.1671-251x.2015.02.030

Volume 41 Issue 2

Turn off MathJax

Article Contents

Article Navigation > Journal of Mine Automation > 2015 > 41(2): 107-110

QIU Xingguo, FANG Yisong, LIU Zheng. Design of high-speed modem in drilling rescue[J]. Industry and Mine Automation, 2015, 41(2): 107-110. doi: 10.13272/j.issn.1671-251x.2015.02.030

Citation:

QIU Xingguo, FANG Yisong, LIU Zheng. Design of high-speed modem in drilling rescue[J]. Industry and Mine Automation, 2015, 41(2): 107-110. doi: 10.13272/j.issn.1671-251x.2015.02.030

QIU Xingguo, FANG Yisong, LIU Zheng. Design of high-speed modem in drilling rescue[J]. Industry and Mine Automation, 2015, 41(2): 107-110. doi: 10.13272/j.issn.1671-251x.2015.02.030

Citation:

QIU Xingguo, FANG Yisong, LIU Zheng. Design of high-speed modem in drilling rescue[J]. Industry and Mine Automation, 2015, 41(2): 107-110. doi: 10.13272/j.issn.1671-251x.2015.02.030

PDF( 629 KB)

Design of high-speed modem in drilling rescue

doi: 10.13272/j.issn.1671-251x.2015.02.030

School of Computer Science and Technology, Xi''an University of Science and Technology, Xi''an 710054, China

Publish Date: 2015-02-10

Abstract

Abstract

In view of problem of low communication rate of armored cable which is used as communication line in drilling rescue, the paper designed a high-speed modem. The modem takes DSP chip TMS320F2812 as core, combines with programmable logic device FPGA to realize signal sampling and capture, and carrier modulation and demodulation are conducted on baseband signal by use of amplitude shift keying mode. The test result shows that the high-speed modem can improve transmission rate of signal and anti-interference ability effectively in 1 000 m rescue communication line, and data transmission rate is higher than 1 Mbit/s.
- drilling rescue,
- high-speed modem,
- armored cable,
- communication rate,
- amplitude shift keying