Green cleaning system for remanufacturing of mine-used equipment

ZENG Qingliang; SU Xingming; WANG Chenglong; LI Shengwen; REN Yan

doi:10.13272/j.issn.1671-251x.2015.02.004

Volume 41 Issue 2

Turn off MathJax

Article Contents

Article Navigation > Journal of Mine Automation > 2015 > 41(2): 14-17

ZENG Qingliang, SU Xingming, WANG Chenglong, et al. Green cleaning system for remanufacturing of mine-used equipment[J]. Industry and Mine Automation, 2015, 41(2): 14-17. doi: 10.13272/j.issn.1671-251x.2015.02.004

Citation:

ZENG Qingliang, SU Xingming, WANG Chenglong, et al. Green cleaning system for remanufacturing of mine-used equipment[J]. Industry and Mine Automation, 2015, 41(2): 14-17. doi: 10.13272/j.issn.1671-251x.2015.02.004

Citation:

PDF( 1035 KB)

Green cleaning system for remanufacturing of mine-used equipment

doi: 10.13272/j.issn.1671-251x.2015.02.004

1.
College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao 266590, China
2.
Technology Center, Shandong Energy Machinery Group Co., Ltd., Taian 271222,

Publish Date: 2015-02-10

Abstract

Abstract

For cleaning technic during remanufacturing process of mine-used equipment, a specific cleaning technical process was proposed for mine-used equipment. A green cleaning system was established based on control core of PLC and ultrasonic cleaning mode. In addition, operation interface on touch screen was designed by configuration software. Field application of the system was introduced taking cleaning process of crankshafts of emulsion pump as an example. Practice shows that the system has advantages of high reliability, significant cleaning effect, low cleaning cost and few pollution of environment.
- mine-used equipment,
- remanufacturing,
- green cleaning,
- ultrasonic cleaning,
- crankshaft of emulsion pump