Real-time fault monitoring technology for coal mine conveying belt

WANG Jianxu

doi:10.13272/j.issn.1671-251x.2015.01.012

Volume 41 Issue 1

Turn off MathJax

Article Contents

Article Navigation > Journal of Mine Automation > 2015 > 41(1): 45-48

WANG Jianxu. Real-time fault monitoring technology for coal mine conveying belt[J]. Industry and Mine Automation, 2015, 41(1): 45-48. doi: 10.13272/j.issn.1671-251x.2015.01.012

Citation:

WANG Jianxu. Real-time fault monitoring technology for coal mine conveying belt[J]. Industry and Mine Automation, 2015, 41(1): 45-48. doi: 10.13272/j.issn.1671-251x.2015.01.012

WANG Jianxu. Real-time fault monitoring technology for coal mine conveying belt[J]. Industry and Mine Automation, 2015, 41(1): 45-48. doi: 10.13272/j.issn.1671-251x.2015.01.012

Citation:

WANG Jianxu. Real-time fault monitoring technology for coal mine conveying belt[J]. Industry and Mine Automation, 2015, 41(1): 45-48. doi: 10.13272/j.issn.1671-251x.2015.01.012

PDF( 689 KB)

Real-time fault monitoring technology for coal mine conveying belt

doi: 10.13272/j.issn.1671-251x.2015.01.012

WANG Jianxu

China Coal Research Institute, Beijing 100013, China

Publish Date: 2015-01-10

Abstract

Abstract

Common faults of coal mine conveying belt were analyzed as well as their causes, including splice breaking, longitudinally tearing, sideslipping, coal-water mixture and conny piling up, etc. Existing monitoring technologies for common faults of coal mine conveying belt were summarized as well as their main problems. For the problem that existing monitoring technologies only alarm after faults but cannot pre-alarm, an intelligent detecting and pre-alarming system for coal mine conveying belt was proposed which was based on machine vision.
- belt conveyor,
- conveying belt,
- conveying fault,
- real-time monitoring,
- fault diagnosis,
- pre-alarming