Application of fiber gratting sensing technology in mine safety monitoring system

TANG Shucheng; ZHANG Jie; ZHANG Heng; ZHOU Feng; YU Shangqi

doi:10.13272/j.issn.1671-251x.2014.07.012

Volume 40 Issue 7

Turn off MathJax

Article Contents

Article Navigation > Journal of Mine Automation > 2014 > 40(7): 41-44

TANG Shucheng, ZHANG Jie, ZHANG Heng, et al. Application of fiber gratting sensing technology in mine safety monitoring system[J]. Industry and Mine Automation, 2014, 40(7): 41-44. doi: 10.13272/j.issn.1671-251x.2014.07.012

Citation:

TANG Shucheng, ZHANG Jie, ZHANG Heng, et al. Application of fiber gratting sensing technology in mine safety monitoring system[J]. Industry and Mine Automation, 2014, 40(7): 41-44. doi: 10.13272/j.issn.1671-251x.2014.07.012

Citation:

PDF( 729 KB)

Application of fiber gratting sensing technology in mine safety monitoring system

doi: 10.13272/j.issn.1671-251x.2014.07.012

1.
Shanghai KNP Material Technology Co., Ltd., Shanghai 201209, China
2.
College of Electronic and Electrical Engineering, Shanghai University of Engineering Science, Shanghai 201620, China

Publish Date: 2014-07-10

Abstract

Abstract

The paper analyzed principle of fiber gratting sensing technology and its advantages, and described its typical application in coal mine safety monitoring system. Various types of mine-used sensors based on sensing principle of fiber gratting can achieve monitoring of physical quantity including roof pressure, roof separation, leakage, temperature of worked out section, safety degree of vertical shaft, landslide displacement, and so on.
- coal mine safety monitoring,
- fiber gratting,
- sensor