A coal mine monitoring and control system based on dual network architecture

WANG Gang; FU Lihua; PANG Jianli

doi:10.13272/j.issn.1671-251x.2014.01.004

Volume 40 Issue 1

Turn off MathJax

Article Contents

Article Navigation > Journal of Mine Automation > 2014 > 40(1): 12-15

WANG Gang, FU Lihua, PANG Jianli. A coal mine monitoring and control system based on dual network architecture[J]. Industry and Mine Automation, 2014, 40(1): 12-15. doi: 10.13272/j.issn.1671-251x.2014.01.004

Citation:

WANG Gang, FU Lihua, PANG Jianli. A coal mine monitoring and control system based on dual network architecture[J]. Industry and Mine Automation, 2014, 40(1): 12-15. doi: 10.13272/j.issn.1671-251x.2014.01.004

Citation:

PDF( 292 KB)

A coal mine monitoring and control system based on dual network architecture

doi: 10.13272/j.issn.1671-251x.2014.01.004

1.
Department of Electrical and Information Engineering, Henan Institute of Engineering, Xinzheng 451191, China
2.
College of Information Engineering, Huanghuai University, Zhumadian 463000, China

Publish Date: 2014-01-10

Abstract

Abstract

In view of situation of complexity of coal mine environment and a wide variety of testing nodes and parameters, a coal mine monitoring and control system based on dual network architecture was proposed. According to different monitored objects, the system uses different networks for data transmission, video streaming data uses Ethernet to transmit, mine environment monitoring data adopts CAN network to transmit. Moreover, the dual networks share the same physical line. The system has some advantages, such as the uniform testing and overall networking of all monitored objects, high network utilization and so on.
- coal mine monitoring and control,
- dual network,
- CAN bus,
- Ethernet,
- data transmission,
- data compression,
- intelligent node