工矿自动化

Modeling and Control of Burning Process for Industrial Boiler

LIU Jun-yao

2001, 27(3): 1-3.

<Abstract>(28)

Abstract:
Process outputs are usually affected by the unmeasurable disturbances, so that it is difficult to get a satisfied performance in the burning process. An inferential technique is adopted to solve the problem in this paper. The effect caused by those factors can be estimated from the measurable output, then the disturbances can be reduced and overcame by using an inferential controller.

An Experimental Research of Anti-poison Catalytic Sensor

WANG Ru-lin, ZHANG Zhi-gang

2001, 27(3): 4-6.

<Abstract>(5)

Abstract:
The catalytic methane sensor will be poised when it works in the atmosphere with the sulphuretted hydrogen, which makes a serious effect on the stability of the working sensor. The paper analyzes the innate character of poising devitalization of the sensor and gives the common tactic of platinum palladium catalyst system of anti poison by experimental research.

Study on the Automatic Compensation Device for High-voltage Network’s Power-factor Based on Microcomputer

ZHENG Zheng, WEI Li-jie

2001, 27(3): 6-7.

<Abstract>(5)

Abstract:
The paper introduces the automatic compensation device of high voltage network’s power factor. Actual running proves that this device can follow and compensate the power factor in real time. Its running is steady and the effect of economizing on electrical power is remarkable.

Developing and Manufacturing of Communication Tested Device for Underground Control and Monitoring Outstations

HUANG Ping

2001, 27(3): 8-10.

<Abstract>(29)

Abstract:
The paper introduces the working principle and structure of a new communication tested device for underground outstations. It also discusses some key techniques and software design of this device.

Long-distance Reset Technique of the Outstation in Microcomputer Control and Monitoring System Used in Coal Mine

TU Yun-wu, GU Song, WANG Yong-sheng

2001, 27(3): 10-12.

<Abstract>(8)

Abstract:
The paper introduces the principle and realized method of long distance reset of the outstation in microcomputer control and monitoring system with changing the form of communication data.

Implementing the Supervision Functions of Hoist System with Fully Digital Control and DC Drive Based on SIMADYN-D

DAI Peng, LI Lei-jun, ZUO Dong-she

2001, 27(3): 12-14.

<Abstract>(12)

Abstract:

The Application of Petri Net in Fault Diagnosing for Speed and Voltage Regulated System of Coal Mine Winch

SONG Yun-zhong

2001, 27(3): 15-17.

<Abstract>(12)

Abstract:
Petri Net is applied to model the system logic relationship, and its reachability concept and state equation are used to solve the problems of fault checking and diagnosing for speed and voltage regulated system of coal mine winch. It is proved that the method is simple and effective.

Speech Pre-warning Device of Shearer

ZHANG Zhi-meng, RUI Guo-hong, DONG Feng

2001, 27(3): 17-18.

<Abstract>(24)

Abstract:

Intelligent System of Electric Energy Measured Based on Lon Works Technique

YANG Chang-chun , SHI Guo-dong , SUI Wei-hong

2001, 27(3): 19-21.

<Abstract>(58)

Abstract:
The LonWorks Net is a new field bus control system developed by Echelon. In the paper, the common method of automatic measure of electric energy for electric meter is realized with this field bus net. And the concrete implement schemes of the hardware and software of the intelligent node and monitoring software of PC are introduced.

The Application of Multi-thread Technique in the Analysis of Coal Quality

XU Guang-yuan, XU Guang-wei, ZHAO Xi-yu

2001, 27(3): 22-24.

<Abstract>(11)

Abstract:

Internal E-commerce Network of Coal Mine Enterprise

LIU Fu-qiang, QIAN Jian-sheng, SU Jun, WANG Hui, LI Shi-yi

2001, 27(3): 24-25.

<Abstract>(37)

Abstract:

Mobile Leakage Communication System Used in Mine

LI Da-jian, WANG Xiao-jing

2001, 27(3): 26-29.

<Abstract>(23)

Abstract:
In this paper, the basic requirements of mobile communication for mine are comprehensively analyzed. The mobile communication equipments approved both at home and abroad and relative mature network modes are introduced. The service area and quality of the system are estimated.

The Application of Speed Regulated Technique with Frequency Conversion in Shearer

WANG Fu-xing , SONG Wei-ying

2001, 27(3): 29-30.

<Abstract>(29)

Abstract:
The paper discusses the application of conversion speed regulated technique in shearer. It also introduces working principle and developing tendency of the shearer with AC electric traction.

The Analysis of Current-limiting Reactor's Influences on Short-200

LI Gang, LI Hong-guang

2001, 27(3): 31-32.

<Abstract>(10)

Abstract:

The Method of Expanding Single-chip Microcomputer Communication Capability

LI Jing-min, LI Yi, LI Hua-zhong

2001, 27(3): 32-34.

<Abstract>(20)

Abstract:
The paper introduces the new method of single chip microcomputer communication, which can use any two bit of P3 or P1 to receive or transmission and form asynchronous communication with the software. In the program, it adopts the voting procedure to filter the interference effectively.

Automatic Measure and COntrol System of Heavy Medium Technological Parameter for Cyclone in Coal Preparation Plant and Its Applicatio

XUE Wei-dong

2001, 27(3): 34-35.

<Abstract>(33)

Abstract:

Application Prospect of Comprehensive Information Putting on Network with Wideband in Coal Mine

JIANG Yu

2001, 27(3): 36-37.

<Abstract>(12)

Abstract:

Design of Model KCⅡA Suspended Support

LIU Guang-xin, GAO Jian-rong, LI Jin-xi, SU Yao-qing