2000 Vol. 26, No. 6

Display Method:
The Research on Grasping of Automatic Synchronization Parallel Switch on Opportunity with Single-chip Microcomputer
FU Zhou-xing, LI Zhong, GUO Ying-na
2000, 26(6): 1-3.
Abstract:
Single chip microcomputer system bases on synchronization conditions, samples and calculates difference of angle between waiting synchronization generator and network ontime, forecasts synchronization opportunity by means of linear interpolation method, grasps rapidly and reliably synchronization opportunity, realizes the automatic synchronization operation of the generator and electric network.
A Linear Bridge Circuit Based on PI Regulator
LI Ai-guo
2000, 26(6): 4-6.
Abstract:
This paper presents a linear bridge circuit based on PI regulator. Its output voltage varies lineally with the resistor value of the sensor, and its adjustment is simple, so the bridge circuit suits the situations which needs high accuracy measuring of temperature with thermistor sensors.
Study of Measuring Method for Metal Impact Ware
ZHAO Ya-wei , ZI Ke-ming , YANG Yan-bo
2000, 26(6): 6-8.
Abstract:
Imapct ware has more ratio in metal material impact ware. It is momentous meaning that how to carry on impact ware testing in laboratory. In this paper through analysis and calculating impact ware capacity, the way to continuously, accurately and timely testing ware capacity was discussed.
Improved SDT Algorithm and Its Application in Process Data Compressio
WANG Zheng-hong
2000, 26(6): 9-11.
Abstract:
The importance and the features of process data compression are described in this paper. The main principle of SDT (Swinging Door Trending) algorithm and the improved SDT is also introduced, the software diagrams of offline compression, online compression and signal reconstruction are given. In the end, the application of SDT algorithm is presented and the performance of the improved SDT algorithm is analyzed.
Application of MATLAB Software in the Fuzzy Control System for Water Level in Boiler
CHEN Xin-hua
2000, 26(6): 12-14.
Abstract:
The control system for water level in boiler is designed by fuzzy control theory. Using MATLAB software to prove and simulate the fuzzy control system, and in order to realize the best real time control for water level in boiler.
How to Improve Reliability of Monitoring and Control System Based on SDT Engineering Computer
FANG Ming-huang , FANG Ming-ye
2000, 26(6): 15-17.
Abstract:
Apply modern theory of reliability to research the feasibility on design, technique and technology of monitoring and control system for hoist in mine. And point forward some measures to improve system’s reliability.
Analysis of Electric-control System for Boom Tunnelling Machine and Study on its Reliability
WU Chong
2000, 26(6): 17-19.
Abstract:
Study of Intelligent Multi-parameter Instruments Used in Mines
SUN Pei-de
2000, 26(6): 20-22.
Abstract:
To accurately, quick and automatically determine the airflow velocity and airflow rate in a tunnel, gas permeability of coalseam, gas flow velocity and flow rate in a borehole as well as the influencing radius of borehole due to gas drainage from coalseam, intelligent instruments have been successfully developed based on single chip microcontroller 80C31 that can be used to achieve data collection, analysis and display output. The multi parameter instruments can be widelly used in coal industry, metallurgical industry, air condition and ventilation and exploitation of coal gas, etc.
Development of Intelligent and Airtight Detecting Device
ZHAO Ji-yong
2000, 26(6): 22-24.
Abstract:
The Fuzzy Control System for Electrodialysis
WANG Yu-bi
2000, 26(6): 25-26.
Abstract:
Study of PLC Monitoring and Control System for Mine Used Switch Element
YANG Jin-zhong
2000, 26(6): 27-28.
Abstract:
Anti-noise Broadcasting Telephone Communication System and Its Application in Coal Mine
ZHANG Bi-xia
2000, 26(6): 29-30.
Abstract:
Application of Automation System for Electricity Dispatching in Huaibei Coal (Group )Co.,Ltd.
MIAO Xue-fu
2000, 26(6): 31-33.
Abstract:
The paper introduced the hardware disposition and foundational function of automation system for electricity dispatching in Huaibei Coal (Group) Co.,Ltd., and analyzed the economic benefit produced probably by it, makes some beneficial discussion in using the modern technical ways to strengthen the management of electricity use, reducing the cost of ton coal and ensuring the electrical wire netting to run safety in coal mine.
Selection Design and Application of Safety and Production Monitoring and Control System for Tucheng Coal Mine
SHE Jun, HU Shao-mei, YU Zhao-xing, HE Pei-qua
2000, 26(6): 33-34.
Abstract:
Designing of Safety Information Management System Used in Coal Mine
SONG Jin-ling , WANG Hui , LIU Yu-ying , ZHANG Hong
2000, 26(6): 35-36.
Abstract:
The safety information management system used in coal mine has many functions, such as security information inputting, inquiring, printing and LED displaying, is designed under network environment with VB, SQL Server, Formula One, etc, in terms of the security management practice in coal mine. The application of this system makes it possible for the automation of safety management practice of coal mine.
Model KJ56 Monitoring and Control System Used in Coal Mine
ZHOU Jian-chao, WANG Ai-bing
2000, 26(6): 37-38.
Abstract:
Model KJ56 Monitoring and Control System Used in Coal Mine
ZHENG Feng-long , ZHENG Xiao-tian , SUN Yu-bao
2000, 26(6): 39-41.
Abstract:
The design methods, main properties and features are introduced in this paper. The system has simple structure and convenient safeguard. It is a comprehensive dispatching and monitoring and control system and it is adapted to middle or small coal mine.
Research of the Application of Industry Controlling Configuration Based on Internet Technology in Coal Enterprise
YU Guo-fang, LI Ming, HUA Gang
2000, 26(6): 41-43.
Abstract:
Development and Application of Read-write System for General IC Card
SHEN Lin, CHEN Zhi-feng, HU Ju
2000, 26(6): 44-45.
Abstract:
Utilisation of Flame-proof Dieseal Rubber-tyred Geared Locomotive and Its Prospect
XU Ya-lei, YANG De-cai, ZHANG Nan-xin, LI Kai-sheng
2000, 26(6): 46-49.
Abstract:
Geared Mould and Its Application Technology
LIU Jing-yan, SU Yao-qing, GUAN Xiao-qiang
2000, 26(6): 49-50.
Abstract: