磁耦合谐振式无线电能传输系统的阻抗匹配方法研究

元士强; 崔玉龙; 王景芹; 范好亮; 樊亚超

doi:10.13272/j.issn.1671-251x.2018090005

磁耦合谐振式无线电能传输系统的阻抗匹配方法研究

doi: 10.13272/j.issn.1671-251x.2018090005

元士强^{1, 2},
崔玉龙^{3, 4},
王景芹^{1, 2},
范好亮⁴,
樊亚超^{1, 2}

1.
1,河北工业大学省部共建电工装备可靠性与智能化国家重点实验室，天津300130
2.
河北工业大学河北省电磁场与电器可靠性重点实验室，天津300130
3.
北京化工大学信息科学与技术学院，北京100029
4.
河北长孚电气设备有限公司，河北保定071052

基金项目:

河北省科技型中小企业技术创新基金项目（16C1303121010，15C1303121014）

详细信息

中图分类号: TD60
计量
- 文章访问数: 37
- HTML全文浏览量: 3
- PDF下载量: 9
- 被引次数: 0
出版历程
- 刊出日期: 2019-01-10

Research on impedance matching method for magnetic resonant coupling wireless power transmission system

YUAN Shiqiang^{1, 2},
CUI Yulong^{3, 4},
WANG Jingqin^{1, 2},
FAN Haoliang⁴,
FAN Yachao^{1, 2}

1.
State Key Laboratory of Reliability and Intelligence of Electrical Equipment, Hebei University of Technology，Tianjin 300130，China
2.
Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability of Hebei Province, Hebei University of Technology，Tianjin 300130，China
3.
College of Information Science and Technology, Beijing University of Chemical Technology, Beijing 100029，China
4.
Hebei Changfu Electric Equipment Corporation, Baoding 071052, China

摘要

摘要: 针对磁耦合谐振式无线电能传输系统中传输距离或负载的改变会导致输入阻抗与射频内阻不匹配，引起输出功率下降的问题，以L型匹配网络为例，提出了一种基于Smith圆图理论的阻抗匹配方法。该方法根据等效电路理论和Smith圆图理论推导出了关于匹配电感和匹配电容的参数表达式，在阻抗失配的情况下通过调节归一化电阻变量即可控制匹配网络参数，从而实现系统的阻抗匹配。仿真和实验结果表明，该匹配方法网络结构简单，避免了复杂的计算过程；相同条件下，匹配后的系统输出功率相较匹配前得到了明显提高，且可有效抑制系统的频率分裂。
- 矿井 /
- 磁耦合谐振式无线电能传输 /
- 阻抗匹配网络 /
- 匹配电感 /
- 匹配电容 /
- Smith圆图 /
- 归一化电阻
Abstract: In view of the problem that the input impedance does not match the RF internal resistance and the output power decreases due to the change of transmission distance or load in magnetic resonant coupling wireless power transmission system, an impedance matching method based on Smith chart theory was proposed taking L-type matching network as an example. Based on equivalent circuit theory and Smith chart theory, a parameter expression of matching inductance and matching capacitance is derived. In the case of impedance mismatch, the matching network parameters can be controlled by adjusting normalized resistance variables, so as to realize the impedance matching of the system. The simulation and experimental results show that the network structure of the matching method is simple and the complex computation process is avoided. Under the same conditions, the output power of the system after matching is significantly improved compared with that before matching, and the frequency splitting of the system can be effectively suppressed.
- mine /
- magnetic resonance coupling wireless power transmission /
- impedance matching network /
- Smith chart /
- matching inductance /
- matching capacitance /
- normalized resistance