采煤机零件参数化CAE分析系统

张立涛; 丁华; 王义亮

doi:10.13272/j.issn.1671-251x.2017.07.004

采煤机零件参数化CAE分析系统

doi: 10.13272/j.issn.1671-251x.2017.07.004

张立涛^{1, 2},
丁华^{1, 2},
王义亮^{1, 2}

1.
太原理工大学机械工程学院，山西太原030024
2.
煤矿综采装备山西省重点实验室，山西太原030024

基金项目:

山西省煤机重点科技攻关项目（MJ2014-05-02）

山西省自然科学基金项目（201601D011050）

山西省研究生联合培养基地人才培养项目（2016JD13）

太原理工大学校基金项目（1205-04020202）

详细信息

中图分类号: TD402
计量
- 文章访问数: 72
- HTML全文浏览量: 9
- PDF下载量: 6
- 被引次数: 0
出版历程
- 刊出日期: 2017-07-10

Parameterized CAE analysis system of shearer parts

ZHANG Litao^{1, 2},
DING Hua^{1, 2},
WANG Yiliang^{1, 2}

1.
College of Mechanical Engineering, Taiyuan University of Technology, Taiyuan 030024, China
2.
Shanxi Key Laboratory of Fully-mechanized Coal Mining Equipment, Taiyuan 030024, China

摘要

摘要: 为了避免采煤机零件有限元分析繁琐的前处理设置和降低有限元分析的门槛，提高采煤机零件有限元分析效率，对采煤机零件的参数化CAE分析方法进行研究，综合利用UG（Unigraphics NX）二次开发工具和 VS2012编程软件开发了基于UG的采煤机零件参数化CAE分析系统。该系统可在UG软件中直接进行零件参数化CAE分析，可直接调用前处理对话框进行有限元分析前处理的设置，通过程序直接调用解算求解器完成分析过程，实现了采煤机关键零件参数化CAE分析全过程，避免了以往不同软件转换造成的数据丢失问题，提高了分析效率。实例验证了该系统的有效性。
- 采煤机 /
- 零件参数化 /
- CAE分析 /
- 有限元分析 /
- UG/Open /
- 解算求解器
Abstract: In order to avoid complicated pretreatment setting of finite element analysis of shearer parts, reduce threshold of the finite element analysis and improve efficiency of finite element analysis of shearer parts, a parameterized CAE analysis method of shearer parts was studied and developed by use of UG secondary development tool and VS2012 programming software. The system can directly make the parameterized CAE analysis of the shearer parts in UG software, directly call pretreatment dialog box to set before finite element analysis, and directly call calculating solver by program to complete analysis process, so as to realize the parametric CAE analysis of key parts of shearer, avoids data loss in data conversion by different softwares, and improves analysis efficiency. The effectiveness of the system is verified by an example.
- shearer /
- parameterized parts /
- CAE analysis /
- finite element analysis /
- UG/Open /
- calculating solver