Volume 48 Issue 8
Aug.  2022
Turn off MathJax
Article Contents
Article Navigation >  Journal of Mine Automation  > 2022  >  48(8): 26-32, 42
HUANG Jinfeng, ZHANG Jianxi, YU Jiangtao, et al. Research on path planning of parallel gangue selection robot[J]. Journal of Mine Automation，2022，48(8)：26-32, 42.  doi: 10.13272/j.issn.1671-251x.2022040073
Citation: HUANG Jinfeng, ZHANG Jianxi, YU Jiangtao, et al. Research on path planning of parallel gangue selection robot[J]. Journal of Mine Automation，2022，48(8)：26-32, 42.  doi: 10.13272/j.issn.1671-251x.2022040073
shu

Research on path planning of parallel gangue selection robot

doi: 10.13272/j.issn.1671-251x.2022040073
  • 1.

    College of Mechanical Engineering, North China University of Science and Technology, Tangshan 063210, China

  • 2.

    Hebei Industrial Robot Industry Technology Research Institute, Tangshan 063000, China

  • 3.

    Tangshan Yintai Intelligent Technology Development Co., Ltd., Tangshan 063000, China

  • Received Date: 2022-04-26
  • Rev Recd Date: 2022-08-03
    • Available Online: 2022-07-18
    Abstract
  • At present, the coal gangue selection manipulator is mostly used in series. Compared with the series manipulator, the parallel manipulator can achieve higher movement speed in a short time, and the load capacity is stronger. Therefore, it is more suitable for the selection of heavy coal gangue. Taking the parallel gangue selection robot as the research object, the two dynamic sorting path planning methods of "ladder" path planning and "V" path planning of parallel manipulator are compared and analyzed. "Ladder" path planning: after the end effector of the manipulator pushes the gangue out of the conveyor belt, it first lifts up a certain distance, and then completes the return movement. "V" path planning: after the end effector of the manipulator pushes the gangue out of the conveyor belt, it first returns to the standard line, and then quickly moves to the position parallel to the next target gangue, completing one movement cycle. By establishing the mechanical model of the parallel manipulator, the torque variation of the drive motor is explored when the manipulator moved along the two paths. The time for completing a movement cycle along the two paths is calculated on the premise that the torque met the requirements. And the working efficiency of the manipulator along the two paths is compared. The simulation results show that the time taken to complete a movement cycle along "ladder" path and "V" path is 1.2, 0.65 s respectively. The "V" path takes a shorter time and has a higher gangue selection efficiency. The site application results show that the average gangue selection rate is 94.23% and 88.28% respectively when the "V" path and the "ladder" path are adopted. The total time of the "V" path is nearly 19% less than that of the "ladder" path, and the gangue selection efficiency is higher.

     

    • FullText(HTML)
  • loading
    • References(19)
  • [1]
    刘强. 煤炭洗选发展中存在的问题和对策[J]. 中小企业管理与科技,2017(36):163-164.

    LIU Qiang. Problems and countermeasures in the development of coal washing[J]. Management & Technology of SME,2017(36):163-164.
    [2]
    刘学雷. 我国选煤技术发展现状及趋势分析[J]. 选煤技术,2018,46(6):12-15. doi: 10.16447/j.cnki.cpt.2018.06.003

    LIU Xuelei. Status quo and developing trend of China's coal preparation technology[J]. Coal Preparation Technology,2018,46(6):12-15. doi: 10.16447/j.cnki.cpt.2018.06.003
    [3]
    陆军. 煤矸石发电是扩大煤矸石综合利用的有效途径[J]. 中国煤炭,2001,27(7):36-37,42. doi: 10.3969/j.issn.1006-530X.2001.07.013

    LU Jun. Low grade coal fired power generation:an effective way to large scale comprehensive utilization of low grade coal[J]. China Coal,2001,27(7):36-37,42. doi: 10.3969/j.issn.1006-530X.2001.07.013
    [4]
    张信龙,唐利刚,张瑞文,等. 常村煤矿井下煤矸石分选工艺设计[J]. 煤炭技术,2015,34(1):323-324. doi: 10.13301/j.cnki.ct.2015.01.113

    ZHANG Xinlong,TANG Ligang,ZHANG Ruiwen,et al. Design of underground coal-gangue separation process of Changcun Coal Mine[J]. Coal Technology,2015,34(1):323-324. doi: 10.13301/j.cnki.ct.2015.01.113
    [5]
    王国法,杜毅博. 智慧煤矿与智能化开采技术的发展方向[J]. 煤炭科学技术,2019,47(1):1-10. doi: 10.13199/j.cnki.cst.2019.01.001

    WANG Guofa,DU Yibo. Development direction of intelligent coal mine and intelligent mining technology[J]. Coal Science and Technology,2019,47(1):1-10. doi: 10.13199/j.cnki.cst.2019.01.001
    [6]
    庞义辉,王国法,任怀伟. 智慧煤矿主体架构设计与系统平台建设关键技术[J]. 煤炭科学技术,2019,47(3):35-42. doi: 10.13199/j.cnki.cst.2019.03.005

    PANG Yihui,WANG Guofa,REN Huaiwei. Main structure design of intelligent coal mine and key technology of system platform construction[J]. Coal Science and Technology,2019,47(3):35-42. doi: 10.13199/j.cnki.cst.2019.03.005
    [7]
    商德勇,章林,牛艳奇,等. 煤矸分拣机器人设计与关键技术分析[J]. 煤炭科学技术,2022,50(3):232-238. doi: 10.13199/j.cnki.cst.ZN20-040

    SHANG Deyong,ZHANG Lin,NIU Yanqi,et al. Design and key technology analysis of coal-gangue sorting robot[J]. Coal Science and Technology,2022,50(3):232-238. doi: 10.13199/j.cnki.cst.ZN20-040
    [8]
    朱子祺,李创业,代伟. 基于G−RRT*算法的煤矸石分拣机器人路径规划[J]. 工矿自动化,2022,48(3):55-62.

    ZHU Ziqi,LI Chuangye,DAI Wei. Path planning of coal gangue sorting robot based on G-RRT* algorithm[J]. Journal of Mine Automation,2022,48(3):55-62.
    [9]
    曹现刚,吴旭东,王鹏,等. 面向煤矸分拣机器人的多机械臂协同策略[J]. 煤炭学报,2019,44(增刊2):763-774. doi: 10.13225/j.cnki.jccs.2019.0734

    CAO Xiangang,WU Xudong,WANG Peng,et al. Collaborative strategy of multi-manipulator for coal-gangue sorting robot[J]. Journal of China Coal Society,2019,44(S2):763-774. doi: 10.13225/j.cnki.jccs.2019.0734
    [10]
    曹现刚,费佳浩,王鹏,等. 基于多机械臂协同的煤矸分拣方法研究[J]. 煤炭科学技术,2019,47(4):7-12. doi: 10.13199/j.cnki.cst.2019.04.002

    CAO Xiangang,FEI Jiahao,WANG Peng,et al. Study on coal-gangue sorting method based on multi-manipulator collaboration[J]. Coal Science and Technology,2019,47(4):7-12. doi: 10.13199/j.cnki.cst.2019.04.002
    [11]
    曹现刚,李宁,王鹏,等. 基于比例导引法的机械臂拣矸过程轨迹规划方法研究[J]. 煤炭工程,2019,51(5):154-158.

    CAO Xiangang,LI Ning,WANG Peng,et al. Research and simulation on priority and path planning of manipulator gangue picking[J]. Coal Engineering,2019,51(5):154-158.
    [12]
    曹现刚,刘思颖,王鹏,等. 面向煤矸分拣机器人的煤矸识别定位系统研究[J]. 煤炭科学技术,2022,50(1):237-246.

    CAO Xiangang,LIU Siying,WANG Peng,et al. Research on coal gangue identification and positioning system based on coal-gangue sorting robot[J]. Coal Science and Technology,2022,50(1):237-246.
    [13]
    马宏伟,孙那新,张烨,等. 煤矸石分拣机器人动态目标稳定抓取轨迹规划[J]. 工矿自动化,2022,48(4):20-30. doi: 10.13272/j.issn.1671-251x.2021110050

    MA Hongwei,SUN Naxin,ZHANG Ye,et al. Track planning of coal gangue sorting robot for dynamic target stable grasping[J]. Journal of Mine Automation,2022,48(4):20-30. doi: 10.13272/j.issn.1671-251x.2021110050
    [14]
    王鹏,曹现刚,马宏伟,等. 基于余弦定理−PID的煤矸石分拣机器人动态目标稳准抓取算法[J]. 煤炭学报,2020,45(12):4240-4247. doi: 10.13225/j.cnki.jccs.2019.1565

    WANG Peng,CAO Xiangang,MA Hongwei,et al. Dynamic target steady and accurate grasping algorithm of gangue sorting robot based on cosine theorem-PID[J]. Journal of China Coal Society,2020,45(12):4240-4247. doi: 10.13225/j.cnki.jccs.2019.1565
    [15]
    夏晶,张昊,周世宁,等. 煤矸分拣机器人动态拣取避障路径规划[J]. 煤炭学报,2021,46(增刊1):570-577. doi: 10.13225/j.cnki.jccs.2020.1448

    XIA Jing,ZHANG Hao,ZHOU Shining,et al. Dynamic picking and obstacle avoidance path planning of coal gangue sorting robot[J]. Journal of China Coal Society,2021,46(S1):570-577. doi: 10.13225/j.cnki.jccs.2020.1448
    [16]
    江洪,宋勇,隋国成,等. 智能选矸机器人系统的研究与应用[J]. 选煤技术,2020,48(4):81-87. doi: 10.16447/j.cnki.cpt.2020.04.019

    JIANG Hong,SONG Yong,SUI Guocheng,et al. Study and application of the intelligent robotic gangue picking system[J]. Coal Preparation Technology,2020,48(4):81-87. doi: 10.16447/j.cnki.cpt.2020.04.019
    [17]
    李奇松. 选矸机械手结构设计与研究[D]. 唐山: 华北理工大学, 2021.

    LI Qisong. The structural design and research of the gangue separator manipulator[D]. Tangshan: North China University of Science and Technology, 2021.
    [18]
    王铮,戴坚锋,钱振宇,等. 面向传送带作业系统的机器人目标跟踪与抓取策略研究[J]. 计算机测量与控制,2016,24(11):85-90. doi: 10.16526/j.cnki.11-4762/tp.2016.11.025

    WANG Zheng,DAI Jianfeng,QIAN Zhenyu,et al. Conveyor belt operating system-oriented robot target tracking and grasping strategy research[J]. Computer Measurement & Control,2016,24(11):85-90. doi: 10.16526/j.cnki.11-4762/tp.2016.11.025
    [19]
    赵明辉. 双臂并联煤矸石分拣机器人及其轨迹规划研究[J]. 工矿自动化,2020,46(9):57-63. doi: 10.13272/j.issn.1671-251x.2020040059

    ZHAO Minghui. Research on dual-arm parallel coal gangue sorting robot and its trajectory planning[J]. Industry and Mine Automation,2020,46(9):57-63. doi: 10.13272/j.issn.1671-251x.2020040059
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(8)  / Tables(1)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (207) PDF downloads(43) Cited by()
    Proportional views
    Related

    苏ICP备 05016349号-2

    Supported by: Beijing Renhe Information Technology Co. Ltd.  Visits：    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return