Abstract:
To reveal the mechanisms of energy accumulation and progressive instability in gas-bearing coal under repeated dynamic disturbances, cyclic impact tests at constant incident energy were conducted on cubic raw-coal specimens with initial gas pressures of 0, 0.5, 1.0, and 1.5 MPa using a split Hopkinson pressure bar test system equipped for visualization of gas-bearing coal. Dynamic mechanical parameters and single-impact and cumulative apparent dissipated energy were analyzed based on stress-wave theory. Ultra-high-speed photography and Digital Image Correlation (DIC) were combined to characterize strain localization, and fragment sieving and fractal theory were used to quantify the final degree of fragmentation. A cumulative energy damage model accounting for gas pressure was established. The results showed the following: ① the cyclic impact life of gas-bearing coal decreased exponentially with increasing gas pressure, with the mean number of impacts to failure decreasing from 9.2 at 0 MPa to 4.4 at 1.5 MPa. Dynamic peak stress and dynamic modulus evolved through initial adjustment, stable degradation, and accelerated attenuation, with high gas pressure causing the accelerated damage stage to occur substantially earlier. ② Single-impact apparent dissipated energy increased rapidly during the late cycles, and cumulative energy evolution comprised initial adjustment, stable accumulation, and accelerated instability. Cumulative apparent dissipated energy at instability decreased from 24.64 J to 10.84 J. ③ As cycling progressed, high-strain regions evolved from a single localized band into multiple dispersed regions that intersected and coalesced. Gas wedging and adsorption-induced weakening promoted earlier crack initiation and multiscale propagation. ④ The mean particle size of fragmented coal decreased from 8.12 mm to 4.62 mm, while the fractal dimension increased from 2.21 to 2.51. ⑤ The proposed normalized cumulative energy damage model adequately describes damage evolution characterized by the dynamic modulus, with coefficients of determination exceeding 0.97 under all pressure conditions.